China OEM 330800 179 Car Part Front Rear Axle Steel Wheel Bearing for Audi Honda Toyota Mazda BMW bearing block

Product Description

Goods Description

Wheel Hub Bearing

A hub bearing, also acknowledged as a wheel hub bearing, allows the wheels and connected factors to rotate smoothlyand keeps the wheel connected to the car. The bearings are mounted on a wheel hub, which is located among the brake drums and the axle. 
Wheel bearings dress in out in excess of time owing to age and contamination. As they put on out, extra play also develops in the bearing. The main signs of a ruined wheel hub bearing are irregular noises and loose steering.
Our hub bearing assemblies are created from high quality resources for durability, reliability, and high functionality. 
substantial top quality seal design and style offers quality defense from contamination and makes certain a clear, long lasting hub bearing.
Our hub bearings are precision-machined and pre-coated with an anti-corrosion lubricant for enhanced security and performance. They are manufactured to meet up with or exceed expectations for overall performance and suit.
In addition, they are made for quick and easy installation. Please notice: Hub Bearings must often be replaced in pairs (front or rear). 
In addition, hub bearings have to be torqued to motor vehicle requirements to prevent failure.

Solver issue:

  • Usually unberable
  • Auto Jitter
  • Power reduction
  • Automobile noise

Attributes:

  • Very good Ball: Precision and dimensions are a lot more stable.
  • Good grease: permit the bearing to roll smoother.

  • Durable good quality: superb metallic content, use-resistant and sturdy.

    All items are all factory full inspection , like Abs detection,sounds detection, cleareance detection for accomplished product, vibration detection, Angular clearance detection, Waterproof and dustproof detection and so on, generating items much more sturdy,far more protected and existence lengthier.

  • Reduce irregular sounds,Secure driving
  • Large stability
  • Lengthier services daily life and lower upkeep expense.
  • In-situ set up: Original specification,set up in 1 step. With correctly find mounting holes.

 

 

Why select us to be your cooperated supplier from China?
one. A broad variety of Wheel Hub Bearingfor alternatives.
two. Good quality assurance: Sophisticated products, 100% concluded product check, all of the products are inpsected very carefully by QC ahead of supply. Merchandise is Safe, Fixed,Stable,Sturdy.
3. Fast shipping and delivery, Prompt response,Expert staffs.
4. The personalized elements also can be made
five. Neutral packing, export standard carton, or as your prerequisite.
six. Competive value: Buy a HQ container, price tag will be more favorable.

Associated Goods
1. A wide selection of Radiator Cooling Fan and other elements for choices.
2. Good quality assurance: Advanced tools, 100% completed product check, all of the merchandise are inpsected very carefully by QC before supply. Merchandise is Risk-free, Fixed,Steady,Tough.
three. Fast shipping, Prompt response,Skilled staffs.
4. The customized parts also can be manufactured
5. Neutral packing, export regular carton, or as your requirement.
six. Competive price: Order a HQ container, price will be far more favorable.

VW, AUDI, BENZ, BMW, PORSHCHE, LAND ROVER,Toyota, Nissan, Mitsubishi, Honda, Mazda , Hyundai Fordetc.
one. Clutch technique
two. Cooling method
3. Electrical program
four. Transmission method
5. Steering technique
six. Generate technique
seven. Suspension technique
8.Braking syste

Company Introduction

FAQ
1. Is the item in shape to your auto model?
Please check if the components are suited for your product ahead of obtain.
Or please explain to us your Vehicle Model and OE Number, and notify us the item identify.

2. What you can offer to me?
We could provide all types of automobile spare elements and equipment. Besides ,we provide OEM support, transport provider and QC provider as well to make positive you get 1-Stop obtain method from us.

3. Can you customise the goods as for each our ask for?
Yes, we do OEM and ODM. We could make the solution suggestion primarily based on your notion and spending budget.

four. How to get a sample from you?
All samples will be free of charge if device expense below 20USD,but the freight ought to be on your side. If you have categorical account like DHL,UPS and so forth we will send out you directly, if you will not have you can deliver express cost to our paypal account, any sample price could be returned when you make purchase.

five. What is your payment term?
We normally carrying out 30% deposit and 70% harmony towards duplicate of B/L by T/T, We also acknowledge L/C ,D/P if total quantity in excess of $30000.

Welcome to your inqury now and built a long cooperatitive romantic relationship with our specialist support.

Windy Zhang

US $10.9-13.9
/ Piece
|
200 Pieces

(Min. Order)

###

Type: Wheel Hub Bearing
Material: Stainless Steel
Tolerance: P0-P6
Certification: ISO9001, TS16949, ISO9006, QS9000, VDA6.1
Clearance: C0-C5
ABS: With ABS

###

Samples:
US$ 20/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
US $10.9-13.9
/ Piece
|
200 Pieces

(Min. Order)

###

Type: Wheel Hub Bearing
Material: Stainless Steel
Tolerance: P0-P6
Certification: ISO9001, TS16949, ISO9006, QS9000, VDA6.1
Clearance: C0-C5
ABS: With ABS

###

Samples:
US$ 20/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

Types of Ball Bearings

There are many types of Ball Bearings available on the market, but which one is best for your application? Here, we will discuss the differences between Angular contact, Single-row, High-carbon steel, and Ceramic ball bearings. These types of bearings also feature races, or a groove in the center of each. These races are important in keeping the balls contained within the cylinder. They also provide a groove-baed pathway.
bearing

Ceramic

The ceramic ball used in ball bearings has many advantages. It is lightweight, operates at lower temperatures, has reduced skidding, and is resistant to electrolysis. The ball also exhibits longer fatigue life. All of these factors make the ceramic ball a good choice for many applications. But, how do you know if a ceramic ball bearing is right for your application? Read on to discover why ceramic ball bearings are a better choice than steel or stainless steel ones.
The ceramic balls are 40% more dense than steel. This means less centrifugal force is generated on the bearing, which suppresses heat generation. Because of this reduced friction, ceramic bearings are more efficient at transferring energy. Compared to steel bearings, ceramic balls have longer life spans. Nonetheless, these ceramic balls aren’t as strong as steel. Therefore, it is important to understand the limitations of the ceramic ball bearing before buying one.
The ceramic materials used for ball bearings are resistant to micro-welding. Metals undergo this process when imperfections in the surfaces interact. Eventually, this results in a brittle ball that reduces the life of a bearing. Unlike metals, ceramic materials have a stable behavior at high temperatures and exhibit less thermal expansion. This means that they can be used for applications where lubrication isn’t an option.
While steel balls can easily absorb contaminants and foreign particles, the ceramic ball is insensitive to this, and doesn’t require lubrication. This means they’re not susceptible to corrosion and other common problems. These are just a few reasons why ceramics are a better choice. This technology has a wide range of uses. It’s easy to see why it is so popular. If you’re looking for a new bearing for your application, be sure to contact an AST Applications Engineer. They can analyze your operating conditions and potential failure modes.

Angular contact

An Angular Contact Ball Bearing (also known as an angular-contact bearing) has an axial component that is generated when radial loads are applied. They are generally used in pairs, triplex sets, or quadruplex sets. These bearings are also available with Super Finished Raceways to reduce noise and improve lubricant distribution. Angular contact ball bearings have various design units, such as bore size, outer diameter, and outer ring width.
A single-row angular contact bearing has a radial contact angle that is equal to the angular distance between the two rings. Double-row angular bearings are designed for two-way thrust capability. These types of bearings can be purchased at Grainger and other online retailers. A typical angular contact bearing will last up to a million revolutions. They are often used in industrial angular contact bearings.
Single-row angular contact ball bearings feature a set contact angle. These bearings can support radial and axial loads, but they can’t withstand high speeds. Single-row angular contact ball bearings may also have one or two shoulders relieved. Thrust load is a pressure placed on the bearing when it is installed in an assembly, and it is used to create an angle between the races.
Angular contact ball bearings come in single and double-row configurations. They differ in the axial load they can carry and the type of lubrication they use. Angular contact ball bearings are ideal for high-speed applications and can accommodate both radial and axial loads. The type of contact and lubrication used in angular-contact ball bearings depends on the intended use for the bearing.
bearing

High-carbon steel

Carbon steel is a low-alloy and high-carbon steel used in bearings. This material provides superior strength and fatigue properties for ball and roller bearings. Its mechanical properties are ideal for applications where the temperature is less than 400 degrees Fahrenheit. High-carbon steel is also used to make bearing components for chrome steel bearings. These types of steels are softer than chrome steel but provide superior durability in applications where the material is exposed to severe conditions.
Hardened carbon steel balls with an AISI 1015 hardness index are used in a variety of automotive, commercial, and semi-precision applications. In addition to automotive applications, they are also used in slides, trolleys, and conveyors. AISI 1015 carbon steel balls are used in bearings. They can be purchased in a variety of weights and diameters. Carbon steel balls can also be purchased in nickel-plated or uncoated varieties for decorative purposes.
In order to determine whether a ball bearing is made of high-carbon steel, the material must be tested for its hardness. An ordinary pocket magnet will work well, but an ordinary rare earth magnet isn’t powerful enough to measure the hardness. If it attracts the magnet strongly, the metal is steel, while a weak magnet indicates a non-ferrous material. A hardness test requires a special microhardness test.
A lower-carbon steel is another option. Some miniature bearing manufacturers use a material with less carbon than AISI 440C. This material is also known as KS440 or X65Cr13. After being heat-treated, it develops smaller carbides, resulting in superior low-noise characteristics and the same corrosion-resistance as 440C. These materials are a less expensive alternative than chrome steel, but they are often less durable than chrome alloy steel.

Single-row

Single-row angular contact ball bearings accommodate axial loads in one direction. These are normally adjusted against a second bearing. Unlike other ball bearings, they are non-separable and contain an upper and lower shoulder. Single-row ball bearings are made of Chromium Steel (GCr15) which is heat-treated to achieve high uniform hardness and excellent wear resistance. They are the most commonly used type of bearings in the world.
Because of the angular contact between the radial plane and the raceway, single-row ball bearings transmit radial forces from raceway to raceway. A higher a, the greater the axial load carrying capacity of the bearing. Single-row angular contact ball bearings are ideal for high axial loads. However, they have limited preload capabilities and must be installed in pairs. Hence, they are best used for applications where axial forces must be distributed.
Single-row ball bearings can be pre-lubricated and have steel shields. They are also available with rubber seals or snap rings on the outside edge. They are available with various retainers, including pressed steel cages, plastic shields, and rubber seals. A tapered bore is also available upon request. They are ideal for applications where space is limited. The 6200 series of bearings are especially well suited for electrical motors, dental hand tools, and optical encoders.
Single-row angular contact ball bearings are widely used for axial loads. The outer and inner rings have slightly larger radii than the balls. These bearings can accommodate high speeds and low torque. They can also be supplied with different grease levels. If grease is needed, you can choose a lubricant that has different characteristics depending on the application. They are easy to install and maintain. However, they are not recommended for adjacent mounting.
bearing

Plastic

A plastic ball bearing is a highly versatile component that can be mounted in a variety of components, including wheels, pulleys and housings. The outer ring of a plastic bearing is usually the pulley profile. The inner ring can be made of a shaft or polymer. The integrated design of a plastic ball bearing helps to reduce assembly time and cost. Here are some of the benefits of this type of bearing:
First and foremost, plastic balls are lighter than metal balls. They also have less magnetic properties than steel balls, making them the best option for applications requiring low weight and noise. Glass balls are also lighter than stainless steel balls, making them the ideal metal-free choice. They are also very corrosion-resistant, which makes them a great choice for some applications. In addition to being lightweight, polymer ball bearings are also quiet. And because of their low weight, plastic ball bearings are ideal for applications that require fast speed.
Another advantage of plastic bearings is their ability to withstand high temperatures. This material is also abrasion and corrosion-resistant. It meets FDA and USDA acceptance requirements. Aside from its abrasion-resistant and corrosion-resistant properties, these plastics do not transfer heat. Aside from being extremely durable and flexible, most plastics are also self-lubricating. Common plastics include phenolics, acetals, nylon, and ultra high molecular weight polyethylene. Nonetheless, plastics have limitations, and these materials may be damaged by extreme temperatures or cold flow under heavy loads.
Other advantages of plastic ball bearings include their low density, high hardness and low friction coefficient, and ability to withstand heat and corrosion. Ceramics are also lightweight, non-conductive, and have superior resistance to friction. These products can withstand temperatures up to 1,800 degrees Fahrenheit. If you’re in the market for a plastic ball bearing, it’s important to choose the right type of material. And if you’re looking for a high-quality bearing, look no further.

China OEM 330800 179 Car Part Front Rear Axle Steel Wheel Bearing for Audi Honda Toyota Mazda BMW     bearing blockChina OEM 330800 179 Car Part Front Rear Axle Steel Wheel Bearing for Audi Honda Toyota Mazda BMW     bearing block
editor by czh 2023-01-24

Leave a Reply

Your email address will not be published. Required fields are marked *