Tag Archives: bearing shaft

China Custom 6306 Z Zz 2RS High Quality Long Life Original Factory Deep Groove Ball Bearing drive shaft bearing

Product Description

Product Description

6300 series deep groove ball bearings
other series: product-list-1.html

 

Bearing NO (mm)
Boundary Dimensions
(Kn)Dynamic Load RatingCr (Kn)Static Load RatingCor (r/min)
Limit Rotational Speed
(Kg)
Weight
d D B Grease Lubrication Oil Lubrication
6300 10 35 11 7.65 3.47 22000 26000 0.571
6301 12 37 12 9.72 4.20 20000 24000 0.571
6302 15 42 13 11.44 5.43 17000 20000 0.0804
6303 17 47 14 13.58 6.58 15000 18000 0.1096
6304 20 52 15 15.94 7.88 14000 17000 0.1417
6305 25 62 17 22.38 11.49 11000 13000 0.2193
6306 30 72 19 27.00 15.19 9500 12000 0.3498
6307 35 80 21 33.36 19.21 8500 10000 0.4542
6308 40 90 23 40.75 24.01 7500 9000 0.6394
6309 45 100 25 52.86 31.83 6700 8000 0.8368
6310 50 110 27 61.86 37.49 6000 7500 1.0822
6311 55 120 29 71.50 45.00 5600 6700 1.3500
6312 60 130 31 82.00 52.00 5300 6300 1.7000
6313 65 140 33 92.50 60.00 4800 6000 2.0800
6314 70 150 35 104.00 68.00 4500 5300 2.5500
6315 75 160 37 113 76.8 4300 5000 3.05
6316 80 170 39* 123 86.5 4000 4800 3.62
6317 85 180 41 132 96.5 3800 4500 4.27
6318 90 190 43 145 108 3600 4300 4.91
6319 95 200 45 153 119 3000 3600 5.70
6320 100 215 47 173 140 2800 3400 7.20
6321 105 225 49 184 153 2600 3200 7.84
6322 110 240 50 205 178 2400 3000 9.22
6324 120 260 55 207.0 185.0 2200 2800 12.5
6324-2Z 120 260 55 207.0 185.0 2200 2800  
6324-2RS 120 260 55 207.0 185.0 1800 2800  
Note:Above-mentioned products include its modification series,such as Z,2Z,RS,and 2RS etc.

 

Detailed Photos

 


Black chamfer with rubber seal

Black chamfer with white dust cover

open UG

white chamfer with yellow dust cover

ceramic ball bearing

THE USE OF THE BEARING
Some tips on use
Rolling bearing is a precise part. Therefore it should be used carefully. No matter how high performance the bearing has, it can be obtained by improper use, the followings are the points for attention to use bearings.
(1) Keep clean the bearing and its surrounding areas
It is harmful to the bearing even by tiny dust which can not be seen by human eyes. Therefore it should always keep clean the surrounding environments in order to prevent the bearing from dust corrosion.
(2) Use bearing carefully
Scar and indentation can essily be produced out of strong impact to the bearing in use and become the cause of accidents. Therefore special caution should be given to its use.
(3) Use the appropriate operating tool
Avoid using a hammer or heavy direct tap on a bearing or sleeve, must use appropriate tools such as press or heating.
(4) Be careful to the rust corrosion of the bearings
The sweat in the hands will cause rust in operating the bearings. Therefore your hands should be cleanly washed and dried before operation. You’d better wear gloves in doing the work. 
(5) Handler should familiar with bearing
(6) Establish bearing handling criteri
·Bearing storage
.Bearing and surrounding cleaning
.Dimension of mounting parts and inspection
.Machining quality
.Mounting handing
.After mounting inspection
·Disassembly handing
·Keep maintain
·Adding lubricant

 

Installation Instructions

 Bearing mounting
 Precautions for proper mounting of bearing
1) Bearing preparation
Bearing should not be unpacked until before mounting due to spray anti-corrosion oil and pack anti-corrosion paper. In addition, spray anti-corrosion oil on bearing have good lubricate function. For general purpose, just directly using bearing fill-in grease bearings, without cleaning. However, bearing for instrument or high speed rotating must be cleaned with clean filtered oil in order to remove the anti-corrosion oil. At that time, the bearings are easy to corrosion could not storage long term.
2) Inspection of shafts and housings
Cleaning shaft and housing, confirming no scratched or machine burrs, no CZPT and cutting piece in housing. Secondly comppare with drawing, the shaft and housing of dimension, form and machining quality should be inspected.
chart 1 Measure location for shaft diameter                                                                         chart 2  Measure location for housing bore diameter                       

As chart 1 and chart 2 showing, divided several locations to be measure on shaft and housing bore diameters, It should be careful inspected perpendicular between shaft, housing fillet dimension and shoulder.
Before mounting bearing, it should be sprayed mechanical oil on fitting surface after check out the shaft and housing.

Bearing storage
Before leaving the factory, the bearing is sprayed proper rust-inhibiting oil and packed rust-inhibiting paper. The quality of bearing is guaranteed, if the packing is not broken.
For long-term storage, if the humidity less than 65% and the temperature about 20, it should storage on shelf which is higher 30cm than ground.
In addition, storage occasion should avoid sunshine and contact with cold wall.

Pictures about packaging

 

Company Profile

Our Advantages

1. World-Class Bearing: We provide our customers with all types of indigenous bearing with world-class quality.
2. OEM or Non-Stand Bearings: Any requirement for Nonstandard bearings is Easily Fulfilled by us due to its vast knowledge and links in the industry.
3. Genuine products With Excellent Quality: The company has always proved the 100% quality products it provides with genuine intent.
4. After Sales Service and Technical Assistance: The company provides after-sales service and technical assistance as per the customer’s requirements and needs.
5. Quick Delivery: The company provides just-in-time delivery with its streamlined supply chain. 
SAMPLES
1. Samples quantity: 1-10 PCS are available. 
2. Free samples: It depends on the Model No., material and quantity. Some of the bearings samples need client to
    pay samples charge and shipping cost. 
3. It’s better to start your order with Trade Assurance to get full protection for your samples order. 

CUSTOMIZED
The customized LOGO or drawing is acceptable for us. 

MOQ
1. MOQ: 10 PCS standard bearings. 
2. MOQ: 1000 PCS customized your brand bearings. 

OEM POLICY
1. We can printing your brand (logo, artwork)on the shield or laser engraving your brand on the shield. 
2. We can custom your packaging according to your design
3. All copyright own by clients and we promised don’t disclose any info.

 

Motor Parts: Motor Bearing
Water Pump Parts: Water Pump Bearing
Air Compressor Parts: Air Compressor Bearing
Samples:
US$ 50/Piece
1 Piece(Min.Order)

|

Order Sample

black or white or as required
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

ball bearing

Can you Provide Examples of Industries where Ball Bearings are Crucial Components?

Ball bearings are essential components in a wide range of industries where smooth motion, load support, and precision are vital. Here are some examples of industries where ball bearings play a crucial role:

  • Automotive Industry:

Ball bearings are used in various automotive applications, including wheel hubs, transmissions, engines, steering systems, and suspension components. They provide reliable rotation and support in both passenger vehicles and commercial vehicles.

  • Aerospace Industry:

In the aerospace sector, ball bearings are found in aircraft engines, landing gear systems, control surfaces, and avionics equipment. Their ability to handle high speeds and precision is vital for aviation safety.

  • Industrial Machinery:

Ball bearings are integral to a wide range of industrial machinery, including pumps, compressors, conveyors, machine tools, printing presses, and textile machinery. They facilitate smooth operation and load distribution in these diverse applications.

  • Medical Equipment:

In medical devices and equipment, ball bearings are used in surgical instruments, imaging equipment, dental tools, and laboratory machinery. Their precision and smooth movement are crucial for accurate diagnostics and treatments.

  • Robotics and Automation:

Ball bearings are key components in robotic arms, automation systems, and manufacturing machinery. They enable precise movement, high-speed operation, and reliable performance in automated processes.

  • Renewable Energy:

Wind turbines and solar tracking systems utilize ball bearings to enable efficient rotation and tracking of the wind blades and solar panels. Ball bearings withstand the dynamic loads and environmental conditions in renewable energy applications.

  • Marine and Shipbuilding:

Ball bearings are used in marine applications such as ship propulsion systems, steering mechanisms, and marine pumps. They withstand the corrosive environment and provide reliable performance in maritime operations.

  • Heavy Equipment and Construction:

In construction machinery like excavators, bulldozers, and cranes, ball bearings support the movement of heavy loads and enable efficient operation in demanding environments.

  • Electronics and Consumer Appliances:

Consumer electronics like electric motors, computer hard drives, and household appliances rely on ball bearings for smooth motion and reliable operation.

  • Oil and Gas Industry:

In oil and gas exploration and extraction equipment, ball bearings are used in drilling rigs, pumps, and processing machinery. They handle the high loads and harsh conditions of this industry.

These examples demonstrate how ball bearings are indispensable components in various industries, contributing to the efficiency, reliability, and functionality of diverse mechanical systems and equipment.

ball bearing

What Role do Seals and Shields Play in Protecting Ball Bearings from Dirt and Debris?

Seals and shields are critical components of ball bearings that play a crucial role in protecting them from dirt, debris, moisture, and contaminants in various applications. These protective features help maintain the integrity of the bearing’s internal components and ensure reliable operation. Here’s how seals and shields contribute to bearing protection:

  • Contaminant Exclusion:

Seals and shields create a physical barrier between the external environment and the bearing’s interior. They prevent dust, dirt, water, and other contaminants from entering the bearing and coming into contact with the rolling elements and raceways.

  • Lubrication Retention:

Seals and shields help retain lubrication within the bearing. They prevent the lubricant from escaping and contaminants from entering, ensuring that the bearing remains properly lubricated for smooth operation and reduced friction.

  • Corrosion Prevention:

Seals and shields protect bearing components from exposure to moisture and corrosive substances. By preventing moisture ingress, they help extend the bearing’s lifespan by minimizing the risk of corrosion-related damage.

  • Extended Bearing Life:

Seals and shields contribute to the overall longevity of the bearing by reducing wear and damage caused by contaminants. They help maintain a clean internal environment, which promotes proper rolling contact and minimizes the risk of premature failure.

  • Enhanced Performance in Harsh Environments:

In applications exposed to harsh conditions, such as outdoor machinery or industrial settings, seals and shields are vital. They protect bearings from abrasive particles, chemicals, and extreme temperatures, ensuring reliable performance despite challenging conditions.

  • Noise and Vibration Reduction:

Seals and shields can help reduce noise and vibration generated by the bearing. They provide additional damping and stability, contributing to smoother operation and enhanced user comfort in noise-sensitive applications.

  • Customized Protection:

Manufacturers offer a variety of seal and shield designs to suit different application requirements. Some seals provide higher levels of protection against contamination, while others are designed for high-speed or high-temperature environments.

  • Trade-Offs:

While seals and shields offer significant benefits, they can also introduce some friction due to contact with the bearing’s inner or outer ring. Engineers must balance the level of protection with the desired operating characteristics, considering factors like friction, speed, and environmental conditions.

Overall, seals and shields play a vital role in maintaining the integrity and performance of ball bearings. By effectively preventing contaminants from entering and preserving lubrication, they ensure the smooth and reliable operation of machinery and equipment in a wide range of applications.

ball bearing

What are the Different Components that Make up a Typical Ball Bearing?

A typical ball bearing consists of several essential components that work together to reduce friction and support loads. Here are the main components that make up a ball bearing:

  • Outer Ring:

The outer ring is the stationary part of the bearing that provides support and houses the other components. It contains raceways (grooves) that guide the balls’ movement.

  • Inner Ring:

The inner ring is the rotating part of the bearing that attaches to the shaft. It also contains raceways that correspond to those on the outer ring, allowing the balls to roll smoothly.

  • Balls:

The spherical balls are the rolling elements that reduce friction between the inner and outer rings. Their smooth rolling motion enables efficient movement and load distribution.

  • Cage or Retainer:

The cage, also known as the retainer, maintains a consistent spacing between the balls. It prevents the balls from touching each other, reducing friction and preventing jamming.

  • Seals and Shields:

Many ball bearings include seals or shields to protect the internal components from contaminants and retain lubrication. Seals provide better protection against contaminants, while shields offer less resistance to rotation.

  • Lubricant:

Lubrication is essential to reduce friction, wear, and heat generation. Bearings are typically filled with lubricants that ensure smooth movement between the balls and raceways.

  • Flanges and Snap Rings:

In some designs, flanges or snap rings are added to help position and secure the bearing in its housing or on the shaft. Flanges prevent axial movement, while snap rings secure the bearing radially.

  • Raceways:

Raceways are the grooved tracks on the inner and outer rings where the balls roll. The shape and design of the raceways influence the bearing’s load-carrying capacity and performance.

  • Anti-Friction Shield:

In certain high-speed applications, a thin anti-friction shield can be placed between the inner and outer rings to minimize friction and heat generation.

These components work together to enable the smooth rolling motion, load support, and reduced friction that characterize ball bearings. The proper design and assembly of these components ensure the bearing’s optimal performance and longevity in various applications.

China Custom 6306 Z Zz 2RS High Quality Long Life Original Factory Deep Groove Ball Bearing   drive shaft bearingChina Custom 6306 Z Zz 2RS High Quality Long Life Original Factory Deep Groove Ball Bearing   drive shaft bearing
editor by CX 2023-11-17

China Standard Wj817 CZPT 6203zz Double Shield Deep Groove Ball Bearing Manufacturer for Auto drive shaft bearing

Product Description

Product Description

WHY CHOOSE E-ASIA BEARING?

1) 20 years of rich bearing industry export experience
2) ISO & MPA & CE & SGS & BV certified
3) Professional engineers team and Superior machines
4) 1 hour to HangZhou port or ZheJiang port
5) Strict quality inspection (3 steps) before shipment, such as SGS/BV third party certified.

CHOOSE E-ASIA       REFUSED ONE TIME BUSINESS

Deep groove ball bearing 5 88506 88507 88508A 88508 88509 622 62303 62304 62305 62306 62307 62308 62309 62310
Taper roller bearings 35712 35713 35714 35715 35716 35717 35718 35719 35710 35711 35712 35713 35714 35715 35716 35717 35718 35719 35710 35711 35712 35714 35716 35718 35710 35712 35714 35716 35710 35714 30302 30303 30304 30305 30306 30307 30308 3 3 0571 3 0571 3 0 30321 30322 30324 30326 30328 30330 30332 30334 32204 32205 32206 32207 32208 32209 32210 32211 32212 32213 32214 32215 32216 32217 32218 32219 32220 32221 32222 32224 32226 32228 32230 32232 32236 32238 32240 32244 32248 32303 32304 32305 32306 32307 32308 32309 32310 32311 32312 32313 32314 32315 32316 32317 32318 32319 32320 32321 32322 32324 32326 32330 32334 31303 31304 31305 31306 31307 31308 31309 31310 31311 31312 31313 31314 31315 31316 31317 31318 31319 31320 31324 31326 31328 31332 32 325714 320726 325718 53856k 53860
Self-aligning ball bearings
spherical plain bearing GE4E GE5E GE6E GE8E GE10E GE12E GE15ES GE17ES GE20ES GE25ES GE30ES GE35ES GE40ES GE45ES GE50ES GE60ES GE70ES GE80ES GE90ES GE1 110145 120155 130170 140180 150190 165710
Thrust ball bearing 511 234415 234416 234417 234418 234419 234420 234421 234422 234424 234426 234428 234430 234432 234438 234440 234714 234715 234716 234717 234718 234719 234720 234721 234722 234722 347262 347282 347302 347322 347382 34740
Cylindrical Roller Bearings NU313EMA NU2313EMA NU2314EMA NU415EMA NU216EMA NU2216EMA NJ2216EMA NUP2216EMA NU316EMA NU2316EMA NU217EMA NU2217EMA NU317EMA NU2317EMA NJ2317EMA NU218EMA NJ218EMA NU2218EMA NJ2218EMA NUP2218EMA NU318EMA NJ318EMA NU2318EMA NJ2318EMA NU219EMA NJ219EMA NU2219EMA NJ2219EMA NU319EMA NJ319EMA NU2319EMA NJ2319EMA NU220EMA NJ220EMA NU2220EMA NJ2220EMA NU320EMA NJ320EMA NU2320EMA NJ2320EMA NU222EMA NJ222EMA NU2222EMA NJ2222EMA NU322EMA NJ322EMA NU2322EMA NJ2322EMA NU1571MA NU224EMA NJ224EMA NU2224EMA NJ2224EMA NU324EMA NJ324EMA NU2324EMA NJ2324EMA NU1026MA NU226EMA NJ226EMA NU2226EMA NJ2226EMA NU326EMA NJ326EMA NU2326EMA NJ2326EMA NU1571MA NU228EMA NJ228EMA NU2228EMA NJ2228EMA NU328EMA NJ328EMA NU2328EMA NJ2328EMA NU1030MA NU230EMA NJ230EMA NUP230EMA NU2230EMA NJ2230EMA N2230EMB NU330EMA NJ330EMA NU2330EMA NJ2330EMA NU1032MA NU232EMA NJ232EMA NUP232EMA NU2232EMA NJ2232EMA NU332EMA NJ332EMA NU2332EMA NJ2332EMA NU1034MA NU3034EMA NU234EMA NJ234EMA NU2234EMA NJ2234EMA NU334EMA NJ334EMA NU2334EMA NJ2334EMA NU1036MA NU236EMA NJ236EMA NU2236EMA NJ2236EMA NU336EMA NJ336EMA NU2336EM NJ2336EMA NU1038MA NU238EMA NJ238EMA NU2238EMA NJ2238EMA NU338EMA NJ338EMA NU2338EMA NJ2338EMA NU1040MA NU240EMA NJ240EMA NU2240EMA NJ2240EMA NU340EMA NJ340EMA NU2340EMA NJ2340EMA NU1044MA NJ1044MA NU3044EMA NU244EMA NJ244EMA NU2244EMA NJ2244EMA NU344EMA NJ344EMA NU2344EMA NJ2344EMA N2344EMB NU1048MA NU248EMA NJ248EMA NU348EMA NJ348EMA NU2348EMA NJ2348EMA NU1052MA NU3052MA NU252MA NUP252MA NU2252MA NU2352EMA NU1056MA NU1060MA NU1964MA NF2964EMB NU1064MA NU2264MA NF2968EMB NU1068MA NU3068EMA NU3168EMA NU2372EMA NU1072MA NU1076MA NJ2980EMA NU1080MA NU2080EMA NF2984EMB NU1088MA NU2088EMA NU3188EMA NJ2892EMA NF2992EMB NU3192EMA NU1096EMA NJ1096EMA NU31/500EMA NU18/560MA NU30/600EMA NU20/630EMA NU20/670EMA NU20/670EMA NU30/670EMA NJ28/710EMA NJ29/710MA NU20/750EMA NU20/800EMA NU20/850EMA NU39/900EMA NU20/900EMA NJ18/1120EMA105RU32 105RN32 105RJ32 105RF32 105RT32 170RU51 170RN51 170RJ51 170RF51 170RT51 170RU91 170RN91 170RJ91 170RF91 170RT91 170RU93 170RN93 170RJ93 170RF93 170RT93 180RU51 180RN51 180RJ51 180RF51 180RT51 180RU91 180RN91 180RJ91 180RF91 180RT91 190RU91 190RN91 190RJ91 190RF91 190RT91 190RU92 190RN92 190RJ92 190RF92 190RT92 200RU91 200RN91 200RJ91 200RF91 200RT91 200RU92 200RN92 200RJ92 200RF92 200RT92 210RU92 210RN92 210RJ92 210RF92 210RT92 220RU51 220RN51 220RJ51 220RF51 220RT51 220RU91 220RN91 220RJ91 220RF91 220RT91 220RU92 220RN92 220RJ92 220RF92 220RT92 240RU91 240RN91 240RJ91 240RF91 240RT91 250RU91 250RN91 250RJ91 250RF91 250RT91NCF2922V NCF2924V NCF2926V NCF2928V NCF2930V NCF2932V NCF2934V NCF2936V NCF2938V NCF1840V NCF2940V NCF1844V NCF2944V NCF1852V NCF2952V NCF2960V NCF1864V NCF2964V NCF1868V NCF1876V NCF2976V NCF1880V NCF1884V NCF1888V NCF1892V NCF2992V NCF2996V NCF18/500V NCF29/500V NCF18/530V NCF18/560V NCF18/600V NCF18/630V NCF18/670V NCF18/710V NCF18/750V NCF18/800VNNU4930MAW33 NNU4932MAW33 NNU4934MAW33 NNU4936MAW33 NNU4938MAW33 NNU4940MAW33 NNU4140MAW33 NNU4944MAW33 NNU4144MAW33 NNU4948MAW33 NNU4148MAW33 NNU4952MAW33 NNU4152MAW33 NNU4956MAW33 NNU4156MAW33 NNU4960MAW33 NNU4160MAW33 NNU4964MAW33 NNU4164MAW33 NNU4968MAW33 NNU4068MAW33 NNU4168MAW33 NNU4972MAW33 NNU4072MAW33 NNU4172MAW33 NNU4976MAW33 NNU4076MAW33 NNU4176MAW33 NNU4980MAW33 NNU4080MAW33 NNU4180MAW33 NNU4984MAW33 NNU4084MAW33 NNU4184MAW33 NNU4988MAW33 NNU4088MAW33 NNU4188MAW33 NNU4992MAW33 NNU4092MAW33 NNU4192MAW33 NNU4996MAW33 NNU4096MAW33 NNU4196MAW33 NNU49/500MAW33 NNU40/500MAW33 NNU49/530MAW33 NNU40/530MAW33 NNU49/560MAW33 NNU49/600MAW33 NNU49/630MAW33 NNU49/670MAW33 NNU40/670MAW33 NNU49/710MAW33 NNU49/750MAW33 NNU49/800MAW33 NNU49/850MAW33 NNU49/900MAW33
 

Company Profile

        E-Asia was set up in 1996 and located at HangZhou, a beautiful city in China. Our company is bearing manufacturer and NSK CZPT CZPT CZPT CZPT HRB LYC NACHI C&U bearing distributor. We also provide OEM beaings.Since it was first established, E-AISA was dedicated in research, development and manufacture of bearings. Now, E-AISA has become main and 1 of the first grade suppliers of all kinds of bearings.
          Our products include: Deep Groove Ball Bearings, Self-aligning Ball Bearings, Spherical Bearings, Tapered Roller Bearings,Cylindrical Roller Bearings, Needle Roller Bearings, Self-aligning Roller Bearings, Angular Contact Ball Bearings, Thrust Ball Bearings and Trust Roller Bearings and Special Bearings.
        E-Asia is a backbone enterprise for bearing production in China. With an area of 60, 000 square meters, more than 260 sets devices and machines, and around 200 employees, our company annually turns out more than 6 million sets bearings.

        Our Bearings are exported to the USA, Canada, UK, Germany, Poland, Italy, Russia, the Middle East, Africa and other countries and regions of the world. E-Asia Bearing Co. Ltd. Is committed to the introduction of high-quality bearing products. Our company have more than 200 employees.
        Our brands include ZWZ bearings, CZPT bearings, CZPT bearings, CZPT bearings, CZPT bearings, CZPT bearings and so forth.

 
Our belief is “Specialization is quality; Quality is the future. Any product with 0.01% defect is 100% reject” is our quality policy.

Packaging & Shipping

FAQ

1.What is the minimum order quantity for this product?
Can be negotiated, we will try our best to meet customer needs.Our company is mainly based on wholesale sales, most customers’orders are more than 1 ton.

2.What is your latest delivery time?
Most orders will be shipped within 3-5 days of payment being received.

3.Does your company have quality assurance?
Yes, for 2 years.

4.What is the competitiveness of your company’s products compared to other companies?
High precision, high speed, low noise.

5.What are the advantages of your company’s services compared to other companies?
Answer questions online 24 hours a day, reply in a timely manner, and provide various documents required by customers for customs clearance or sales. 100% after-sales service.

6.Which payment method does your company support?
Do our best to meet customer needs, negotiable.

7.How to contact us quickly?
Please send us an inquiry or message and leave your other contact information, such as phone number, account or account, we will contact you as soon as possible and provide the detailed information you need.

Type: Auto Clutch Bearing
Material: Chrome Steel
Tolerance: P5
Certification: ISO9001, TS16949, ISO9006, QS9000, VDA6.1
Clearance: C3
ABS: Without ABS
Customization:
Available

|

Customized Request

bearing

Materials Used in Bearings

If you’re not familiar with the types of bearings, you may be interested in knowing more about the materials used to manufacture them. Here’s a look at what each type of bearing is made of, how it’s used, and how much they cost. To find the right bearing for your application, it’s important to choose a quality lubricant. The materials used in bearings are determined by their type and applications. Choosing the right lubricant will extend its life, and protect your machine’s parts from damage and premature wear.

Materials used in bearings

Bearings are made from a variety of materials. Stainless steel is a common material used for the components of bearings. It has a higher content of chromium and nickel. When exposed to oxygen, chromium reacts with it to form chromium oxide, which provides a passive film. For higher temperatures, teflon and Viton are also used. These materials offer excellent corrosion resistance and are often preferred by manufacturers for their unique properties.
Stainless steel is another material used in bearings. AISI 440C is a high-carbon stainless steel commonly used in rolling-contact bearings. It is widely used in corrosive environments, especially in applications where corrosion resistance is more important than load capacity. It can also be heat-treated and hardened to 60 HRC, but has lower fatigue life than SAE 52100. Stainless steel bearings may carry a 20-40% price premium, but their superior performance is worth the extra money.
Graphite and molybdenum disulfide are two of the most common materials used in bearings. While graphite is a popular material in bearings, it has very poor corrosion resistance and is unsuitable for applications where oil or grease is required. Graphite-based composite materials are another option. They combine the benefits of both graphite and ceramic materials. A variety of proprietary materials have been developed for high-temperature use, such as graphite and MoS2.
Wood bearings have been around for centuries. The oldest ones used wood and Lignum Vitae. These materials were lightweight, but they were incredibly strong and durable. Wood bearings were also lubricated with animal fats. During the 1700s, iron bearings were a popular choice. In 1839, Isaac Babbitt invented an alloy containing hard metal crystals suspended in a softer metal. It is considered a metal matrix composite.

Applications of bearings

Bearings are used in many different industries and systems to help facilitate rotation. The metal surfaces in the bearings support the weight of the load, which drives the rotation of the unit. Not all loads apply the same amount of force to bearings, however. Thrust and radial loads act in distinctly different ways. To better understand the different uses of bearings, let’s examine the various types of bearings. These versatile devices are essential for many industries, from automobiles to ships and from construction to industrial processes.
Cylindrical roller bearings are designed to support heavy loads. Their cylindrical rolling element distributes the load over a larger area. They are not, however, suited to handling thrust loads. Needle bearings, on the other hand, use small diameter cylinders and can fit into tighter spaces. The advantages of these types of bearings are numerous, and many leading producers are now leveraging the Industrial Internet of Things (IIoT) to develop connected smart bearings.
As a power generation industry, bearings play an essential role. From turbines to compressors, from generators to pumps, bearings are essential components of equipment. In addition to bearings, these components help move the equipment, so they can work properly. Typically, these components use ball bearings, although some roller bearings are used as well. In addition to being efficient and durable, these types of bearings also tend to be built to meet stringent internal clearance requirements and cage design requirements.
In addition to bearings for linear motion, bearings can also bear the weight of a rotary part. Depending on the application, they can be designed to minimize friction between moving parts. By constraining relative motion, bearings are used to reduce friction within a given application. The best-designed bearings minimize friction in a given application. If you’re in the market for a new bearing, NRB Industrial Bearings Limited is an excellent source to begin your search.

Types of bearings

bearing
The type of bearings you choose will have a significant impact on the performance of your machinery. Using the right bearings can increase efficiency, accuracy, and service intervals, and even reduce the cost of purchasing and operating machinery. There are several different types of bearings to choose from, including ball bearings and flexure bearings. Some types use a fluid to lubricate their surfaces, while others do not.
Plain bearings are the most common type of bearing, and are used for a variety of applications. Their cylindrical design allows for a relatively smooth movement. Often made of copper or other copper alloy, they have low coefficients of friction and are commonly used in the construction industry. Some types of plain bearings are also available with a gudgeon pin, which connects a piston to a connecting rod in a diesel engine.
Magnetic bearings are the newest type of bearing. They use permanent magnets to create a magnetic field around the shaft without requiring any power. These are difficult to design, and are still in the early stages of development. Electromagnets, on the other hand, require no power but can perform very high-precision positioning. They can be extremely durable and have a long service life. They are also lightweight and easy to repair.
Another type of bearing is needle roller. These are made of thin, long, and slender cylinders that are used in a variety of applications. Their slender size is ideal for a space-constrained application, and their small profile allows them to fit in tight places. These types of bearings are often used in automotive applications, bar stools, and camera panning devices. They have several advantages over ball bearings, including the ability to handle heavy axial loads.

Cost of bearings

A wide range of factors affect the cost of aerospace bearings, including the bearing material and its volatility. Manufacturers typically use high-grade steel for aircraft bearings, which are highly affected by fluctuations in the steel price. Government policies also play a part in the variation in trade price. The implementation of COVID-19 has changed the market dynamics, creating an uncertain outlook for supply and demand of aerospace bearings. New trade norms and transportation restrictions are expected to hamper the growth of this industry.
Demand for aerospace bearings is largely driven by aircraft manufacturers. In North America, aircraft manufacturers must meet extremely high standards of weight, performance, and quality. They also must be lightweight and cost-effective. This has resulted in a rising cost of aerospace bearings. The market for aerospace bearings is expected to grow at the highest CAGR over the next few years, driven by increasing investments in defense and aerospace infrastructure across Asia-Pacific.
Hub assemblies are also expensive. A wheel hub will cost between $400 and $500 for one set of bearings. In addition to this, the speed sensor will be included. The average cost of wheel bearings is between $400 and $500 for one side, including labor. But this price range is much lower if the bearing is a replacement of an entire wheel assembly. It is still worth noting that wheel hub bearings can be purchased separately for a lower price.
Replacement of one or two wheel bearings will depend on the model and year of the vehicle. For a small car, one rear wheel bearing can cost between $190 and $225, whereas two front wheel hubs can cost upwards of $1,000. Labor and parts prices will vary by location, and labor costs may also be covered under some warranty plans. If you decide to have it done yourself, be sure to ask multiple shops for estimates.

Inspection of bearings

bearing
To maintain bearing performance and prevent accidents, periodic inspections are essential. In addition to ensuring reliability, these inspections improve productivity and efficiency. Regular maintenance includes disassembly inspection, replenishment of lubricant and monitoring operation status. Here are some common ways to perform the necessary inspections. Keep reading to learn how to maintain bearings. After disassembly, you must clean the components thoroughly. Ensure that the bearings are free of burrs, debris, and corrosion.
Ultrasound technology is an excellent tool for monitoring slow-speed bearings. Most ultrasound instruments offer wide-ranging sensitivity and frequency tuning. Ultrasound can also be used to monitor bearing sound. Ultra-slow bearings are usually large and greased with high-viscosity lubricant. Crackling sounds indicate deformity. You can also listen for abnormal noise by plugging a vibration analyzer into the machine. Once the machine shows abnormal noise, schedule additional inspections.
Ultrasonic inspection involves using an ultrasound transducer to measure the amplitude of sound from a bearing. It is effective in early warnings of bearing failure and prevents over-lubrication. Ultrasound inspection of bearings is a cost-effective solution for early diagnosis of bearing problems. In addition to being a reliable tool, ultrasonic testing is digital and easy to implement. The following are some of the advantages of ultrasonic bearing inspection.
Dynamic quality evaluation involves the use of a special fixture for measuring bearing deformations under low shaft speed and light radial load. The size of the fixture influences the value of the deformations. A fixture should be sized between the diameter of the sensor and the roller to ensure maximum precision. The outer deformation signal is more sensitive with a larger sensor diameter. A vibration-acceleration sensor is used for the contrast test.

China Standard Wj817 CZPT 6203zz Double Shield Deep Groove Ball Bearing Manufacturer for Auto   drive shaft bearingChina Standard Wj817 CZPT 6203zz Double Shield Deep Groove Ball Bearing Manufacturer for Auto   drive shaft bearing
editor by CX 2023-11-12

China best Machinery Engine Main Bearing 6210-21-8010 for Engine S6d140 Wheel Loader Wa500-1 Wa500-3 Excavator PC750 Buildozer D155A-3 drive shaft bearing

Product Description

 

Our Advantages

 

Our advantages:
1. Professional: about 20 years experience in machinery spare parts field.
2. Good quality: OEM and high quality goods selected from the best factory in China. We will check goods strictly before sending to the clients.
3. Competitive price: We offer wholesale price for the OEM; high quality and aftermarket parts.
4. Miscellaneous items with sufficient stock to meet your one-stop purchasing.
5. One-stop service: if you have any questions after getting the goods, you can contact us at any time. One sale will follow the whole case for the clients.
6. The cheapest shipping:We have cooperated to the best forwarder for many years, we can quote you the cheapest shipping way.
WE ARE A YOUNG TREAM
We are full of power and energy, we all have more than 3 years of working experience. In this field of construction machinery have certain professional knowledge

 

Company Profile

 

 

Product Description

MODEL  S6D140
PART NUMBER  6210-21-8571
MOQ 7
QUALITY HIGH LEVEL

Other model Liner:

Model number  Part number 
C3306 8N8219
D8K 8N7933
C3116 224-6638
C13 211-0587 
C9 213-3190
C15 224-3246
C3516 C3508 107-7330

Model number  Part number 
M11 3016760
K19 205840
K38 357190
QSX15 457105
QSX15 4090016
QSX15 457139
QSX15 385718

Model number  Part number 
S6D102 6732-31-3410
S6D108 6222-31-3040
S6D114 6742-01-1110
S6D125 6150-31-3040
S6D155 6217-21-8071
S6D140 6210-21-8571
S6D170 6162-23-8571

Pics:
Ralated Products
Company Introdution
DISONG is a trader who is committed to cooperating with factories in many cities. We take factory price as our purpose and serve every partner with our heart

Exhibition
FAQ
Q: What kind of parts you supply?
A: We supply piston ring, piston, engine bearing, cylinder liner, liner kit, and etc. engine parts
Q: What is the minimum quantity?
A: It depends on the availability. If we have stocks, small quantity is accepted.
Q: How long is the delivery time?
A: 2-6 working days for stock items, customized products need to be arranged according to the factory time and delivery time
Q: What kind of packages you supply?
A: Neutral packaging or TE packaging.
Q: Do you offer Warranty?
A: Our company does not provide warranty, some factories have to provide it, warranty time
according to the factory
 

After-sales Service: Online
Warranty: No
Trademark: TE
Origin: Made in China
Customization:
Available

|

Customized Request

bearing

Types of Ball Bearings

There are several types of ball bearings: Double-row angular contact, Four-point contact, Self-aligning, and Ceramic hybrid. Here’s a brief description of each. For more information, read our article about Double-row angular contact ball bearings. You’ll be better informed about how they’re made. Also, learn about how the cages that hold the balls in place are secured with rivets.

Double-row, angular-contact bearing

Double-row, angular-contact ball bearings are similar in their contact surfaces in one direction, and the two pairs of bearings are installed axially opposite to one another. This design allows them to support combined loads in axial and radial directions. These types of bearings are used for high-precision, high-speed applications. They can be used in everything from turbines to dentistry equipment. Double-row, angular-contact bearings are available at Grainger, as are single-row versions.
Double-row, angular-contact ball bearings are a popular option for applications where high precision and high speed are required. The design features of these bearings are ideal for applications with axial space restrictions. In contrast, they are smaller than two single-row angular-contact bearings and are available in steel, polyamide, or brass cages. Whether you need a cage for high speed or hard operating conditions is up to you. If you are unsure about the right cage for your application, contact Schaeffler.
Single-row angular-contact ball bearings are the most common type of bearings. Double-row bearings are also available with a shielded outer ring, which protects the balls inside the bearing from external contaminants. Because these double-row bearings are a good choice for applications requiring high performance, they are often the most affordable option. They offer similar performance as single-row bearings but are much more rigid.
Preloading is a key performance characteristic for double-row angular-contact ball bearings. Preloading can decrease the service life of double-row angular-contact ball bearings by up to 380 percent. Alternatively, you can preload double-row angular-contact ball bearings by placing spacers between their outer rings. Good double-row angular-contact bearing installation will increase working accuracy and bearing life.

Four-point contact ball bearing

The Four Point Contact Ball Bearing Market can be segmented into three types: 35 Degree, 45 Degree, and Other. The 35 Degree segment is expected to witness the fastest growth over the next few years, owing to its increased operational speed and competence in axial and radial axis load handling. Other types of four-point contact ball bearings include the Miniature and Deep Groove varieties. These are widely used in automobiles, aerospace, and other industries.
These bearings are designed for oil-free screw compressors, and they feature an outer-ring guided brass cage to reduce friction and increase running accuracy. In addition, they have lower maintenance costs compared to conventional bearings. However, they have a higher mean roughness value than their counterparts. High-speed operations require high-speed bearings that can withstand fast speed changes. This is because of the higher friction rate, which results from four-point contact.
The Four-Point Contact Ball Bearing is a highly versatile product, as it can handle radial, thrust, and moment loads. Because of this, it is often the first choice for slow to moderate-speed applications. This design also has a simplified assembly process, requiring only a single double-half-turn to install. It is the first choice of many automotive OEMs because it is extremely efficient. If you want a ball bearing with these benefits, you should contact a local bearing company.
The Four-Point Contact Ball Bearing Market will continue to grow despite a tough economy and volatile trade conditions. Demand for automotive and aerospace components is expected to grow alongside a variety of technological advancements. Meanwhile, demand for energy-efficient products will continue to increase with changes in trade policy, an imbalance in the supply-side ecosystem, and geopolitical risk. And while all these factors will continue to drive the market growth, a few challenges are worth considering.
The Four-Point Contact Bearing is designed with the same basic structure as its two-point counterpart. In a four-point contact ball bearing, one ball can have four distinct points of contact with two rings. Two of these contact points may be in diagonal position. The two remaining contact points change position and accommodate radial loads. Consequently, the Four-Point Contact Bearing is more flexible and robust than its two-point counterparts.
bearing

Self-aligning ball bearing

The self-aligning ball bearing is an incredibly useful tool in many industries. This type of bearing has a sealing lip that makes contact with a smooth chamfer on the inner ring. Because of the self-aligning nature of these bearings, they are not prone to misalignment. They can withstand temperatures ranging from -30°C to 120°C and should not be heated prior to installation.
A self-aligning ball bearing is an elastomer-based spherical-shaped bearing with two rows of rolling elements. These bearings can accommodate large radial loads, and their outer ring raceway is curved to provide a spherical effect. The inner ring, or cage, can be either cylindrical or conical. The inner diameter of a self-aligning ball bearing is normally cylindrical, but some are conical. They typically have three oil holes.
When choosing a self-aligning ball bearing, look for a model with a large enough bearing diameter to accommodate the shaft’s bending. Self-aligning bearings may also be interchangeable with standard ball bearing assemblies. You can find individual values in manufacturer catalogues. These bearings are useful in limited applications, although they are not necessarily ideal for everything. For example, in applications where combined loads are the main concern, self-aligning ball bearings should only be used if the application requires minimal misalignment.
A self-aligning ball bearing is a highly-efficient, energy-efficient solution for a variety of applications. It is a simple, low-maintenance solution that makes your life easier. Its unique outer raceway allows restraining springs to absorb the deflection that is common in other bearings. The result is a cooler, smoother running vehicle. It also helps prevent misalignment, which makes it ideal for use in many applications.
The SKF self-aligning ball bearing is an excellent choice for applications involving heavy deflection of the shaft. They are the lowest-friction bearing available. Their steel plate reinforced seals prevent them from separating from the shaft during operation. They are also resistant to oil, making them the perfect solution for high-speed applications. In addition to this, they are designed to work in a wide range of temperatures.
bearing

Ceramic hybrid ball bearing

A hybrid ball bearing made from a combination of steel and ceramics is a good option for high-speed applications requiring electrical isolation. This combination offers an extended lifespan and minimal electrical corrosion or seizure risk. In addition, the hybrid ball bearings have less friction than steel bearings and can operate at low speeds. To learn more about this hybrid type of bearing, continue reading. We’ll also discuss how it can help your application.
Full ceramic balls are generally harder than steel, but they do have lower density, meaning they’re not subject to the same high centrifugal forces as steel balls. These benefits make ceramic ball bearings much more durable, with long lifespans. Both full and hybrid ceramic ball bearings are available from CZPT. Read on to learn more about each type. Here’s a look at some of the benefits of each. You’ll be pleasantly surprised.
A hybrid ball bearing consists of steel inner and outer rings and a ceramic ball. It can withstand high speeds and loads, but it’s also designed to operate in extreme temperatures. This hybrid ball bearing also requires minimal lubrication and is suitable for a variety of applications. Because of its unique characteristics, hybrid bearings are lightweight and hard, and they spin faster than steel balls. But how do you choose the right one for your application?
A ceramic ball bearing is better than a steel one for many applications. Its greater speed capability and lower friction allow it to operate at higher speeds than steel balls. It is also less sensitive to fluctuations in lubrication conditions than steel balls. They also tend to be cheaper, so it makes sense to invest in one. It’s worth your while. They last longer, and they don’t require a run-in period.
A hybrid ball bearing is the best choice for electric spindles with high speed and heavy loads. A hybrid ceramic ball bearing has the advantage of low heat and high stiffness, and can operate at high speeds and loads. This thesis explores the dynamic characteristics of a hybrid ceramic ball bearing, including analysis calculations and experiment verification. The results provide reliable data and lay the foundation for professional spindle optimum design tests. It is a worthy addition to any machine shop.

China best Machinery Engine Main Bearing 6210-21-8010 for Engine S6d140 Wheel Loader Wa500-1 Wa500-3 Excavator PC750 Buildozer D155A-3   drive shaft bearingChina best Machinery Engine Main Bearing 6210-21-8010 for Engine S6d140 Wheel Loader Wa500-1 Wa500-3 Excavator PC750 Buildozer D155A-3   drive shaft bearing
editor by CX 2023-05-30

China Professional bearing factory Customizable GCr15 UCFU209 UCFU208 UCFU207 UCFU206 UCFU205 UCFU204Pillow Block Ball Bearings drive shaft bearing

Variety: Pillow Block, Pillow Block Beairng
Relevant Industries: Equipment Mend Outlets, Building works , Energy & Mining, Agricultural machinery, transportation program, building machinery
Model Variety: UCFU209 UCFU208 UCFU207 UCFU206 UCFU205
Precision Ranking: P0,P6,P5,P4,P2
Content: Chrome Steel GCR15
Software: Machinery
Model: WSRY
Bundle: First Package
Attribute: Prolonged Life
Services: OEM Custom-made Solutions
Sample: Avaliable
Construction: Insert Spherical Bearing
Quality: 1 Packaging & Transportation Plastic bag&paper packaging Tube packaging Carton packaging Container transportation Truck transportation CZPT transportation Workshop Demonstrate & Customer Photographs Why Choose Us

The competitive gain of item line:
The advanced creation equipment and administration crew make sure the stable top quality of items.
Manufacturing Procedure:
Generating Assembling Assembling Marking Inspecting
Generation Equipment:
Machine IdentifyBrand & Model No.AmountQuantity of Calendar year(s) Used
Hydraulic Push Machine/1014.
Bearing Cleaning MachineQX200614.
Oiler MachineQX300310.
Laser Marking DeviceYLP-HB20W49.
Automatic Band SealerHUALIAN46.
Semi Automatic BinderKZB47.
LubricatorQX30048.
Screening Equipment:
Device NameModel & HXHV 22340CAW33 22340 CCKW33 C3 Spherical roller bearings Design No.QuantityNumber of Yr(s) Employed
Bearing Admeasuring EquipmentB571B/D924A/D9141613.
Gauge BlackINKS310.
ScleroscopeHR-150A29.
Clearance DetectorNo Information17.
Vibration MeterBVT-1A27.
Export Market Distribution:
Market placeIncome(Prior Yr)Total Profits (%)
North Americaconfidential7.6
South The usconfidential8.3
Eastern Europeconfidential25
Southeast Asiaconfidential16.one
Africaconfidential1.three
Oceaniaconfidential0.six
Mid Eastconfidential6.4
Eastern Asiaconfidential1.four
Western Europeconfidential7.six
Central The usaconfidential0.eight
Northern Europeconfidential1.three
Southern Europeconfidential1.
South Asiaconfidential2.6
Domestic Marketplaceconfidential20
Certificate Displaying

Advantages and disadvantages of different types of bushings

Bushings are a simple but essential part of machinery with sliding or rotating shaft assemblies. This type of bearing is used in a wide variety of industries because its high load-carrying capacity and excellent anti-friction properties make it a necessity for construction, mining, hydropower, transportation and agricultural machinery. In addition to these applications, bushings also play a vital role in material handling and food processing. This article explores the various types of bushings available.
bushing

air casing

The air bushing forms a frictionless cylinder that applies the load to the rotating object. Bushings are used to measure torque and provide self-centering force in applications where linear motion is critical. The following are load equations that can be used to select the appropriate air sleeve for your application. To learn more about these air sleeves, read on. This article discusses the benefits and uses of air bushings in linear motion.
Bushings have many advantages over bearings. They are not prone to wear and corrosion. Unlike bearings, they can easily bypass conversion and inspection periods. Their high-quality design guarantees reliable machine performance, yet they are inexpensive and easy to replace. In many industries, air compressors are essential for sports. The air bushing eliminates friction, allowing the compressor to work more efficiently. They can also help eliminate the need for frictionless bearings and improve the overall efficiency of the machine.
Another type of air bearing is the cylindrical bushing. These are used for linear and aerostatic motion. Their low friction properties allow them to support radial loads without wearing out or damaging components. They are usually used for normal sized shafts. Air bushings have several components that can be used with other types of air bearings. Cylindrical air bearings have four o-ring grooves that allow them to be inserted into the structure. They are often used with other types of air bearings for smoother motion.

rubber bushing

If you’re looking to buy a new suspension system, you may be wondering if rubber or polyurethane is the right choice. Rubber is less expensive, but not without its drawbacks. Polyurethane is more durable and offers better handling and suspension. Rubber bushings also reduce road feel, while polyurethane isolates the driver from the road. Both materials will help you improve handling and alignment, but each has advantages and disadvantages.
Typically, rubber bushings are cylindrical components with metal inner and outer surfaces. These metals can be stainless steel, mild steel or aluminum. They are usually stress relieved and prestressed for maximum durability. They are designed to meet the exact specifications of a specific application. For example, shock-absorbing rubber bushings are cushioning pads made of polyurethane that absorb road bumps and noise.
Unlike polyurethane, rubber suspension bushings have a shorter lifespan than polyurethane. This is because rubber is more susceptible to damage from UV rays, road chemicals and oils. The rubber also stretches and warps due to the pressure of the road. The rubber bushing also squeaks, which can be cause for concern. But if the noise persists for a long time, it may be a sign that your vehicle needs a new suspension system.
The main reason why cars use rubber bushings is for shock absorption. During machine use, vibration and noise caused by the movement of parts can cause serious damage. To prevent this, rubber bushings act as shock absorbers and damping agents. Rubber bushings are an excellent choice for automakers, but they are also used in a variety of industrial settings.
bushing

Polyurethane bushing

If you want to make your vehicle handle better, polyurethane bushings may be the answer. They come in different shapes and sizes and can improve a wide range of areas. This article will explore the advantages and disadvantages of polyurethane bushings and their potential place in your car. However, before you decide to upgrade your suspension, you should understand the various advantages and disadvantages of polyurethane bushings.
The main difference between a polyurethane bushing and a rubber bushing is how the bushing rides on the suspension arm. Polyurethane bushings do not have faces that slide against each other like rubber bushings. This means they allow for more rotation and flexion, as well as consistent alignment of the control arms. Polyurethane bushings require lubrication, but only need to be lubricated every five years, much longer than equivalent rubber bushings.
Another difference between polyurethane and rubber bushings is hardness. The former has the least elasticity and is generally the most suitable for street use. While rubber bushings provide the best NVH quality, they are also notorious for changing suspension geometry. Rubber is known to be an excellent choice for street use, but polyurethane has a lifespan that far outlasts rubber.

bronze bushing

There are two main types of bronze bushings, sintered and cast. The latter require additional lubrication and are typically used in applications where powder metal products cannot be secured. The former is cheaper than the latter, but the process is more expensive. Bronze bushings can be used in environments where the material will be exposed to high temperature and vibration. For these reasons, the production process is relatively slow and expensive.
The strength of bronze is the main reason why they are so popular. Brass is a softer metal that deforms and corrodes easily. The bronze casing can withstand continuous immersion in water and can last for hundreds of years with little or no maintenance. However, it is important to note that this metal is not resistant to aggressive chemicals and requires regular maintenance to keep it in good condition.
Bronze bushings offer many advantages, including durability and aesthetics. Bronze bushings are available in a variety of sizes and can be ordered in imperial and metric sizes. They can be built to your specifications and are very durable. You can even custom order them if you want. And because they can be customized, they are an excellent choice for high-end applications. The quality of the bronze bushings is second to none.

Plastic bushing

Engineered composite plastic bushings have been shown to last longer than bronze bushings and have also been found to reduce maintenance costs by up to 40%. Plastic bushings have become the first choice for thousands of applications, including medical equipment, food processing machinery, pumps, and more. Bronze bushings are oil-impregnated, but their performance is limited by their inherent weaknesses: oil-impregnated bronze tends to develop high levels of capillary action and requires rotational motion to maintain an intact oil film. Low speed and intermittent use of bronze bushings can also hinder the ability of the lubricant to provide adequate lubrication.
Advantages of plastic bushings over metal include low friction, non-reactive surfaces, and long life. CZPT offers a variety of engineering plastics that outperform traditional metals in a range of applications. For example, nylon bushings resist wear while requiring little lubrication. In addition, polymer-shaped plastics are lightweight and highly resistant to aggressive cleaning agents and chemicals.
Besides being less expensive than metal bushings, plastic bushings offer many other advantages. They are very durable, have a low coefficient of friction, and are more wear-resistant than metal. Unlike metal, plastic bushings do not require lubrication and do not absorb dust and oil like metal bushings. They are lightweight, easy to maintain and last longer. This makes them an excellent choice for many applications.
bushing

Sleeve bearing

Sleeve bearings are simple pipes with matching components. They facilitate linear motion by absorbing friction and vibration. They can withstand heavy loads and work at high temperatures for long periods of time. Flange bearings are similar to sleeve bearings, but are enclosed and rotated in a housing unit. Sleeve bearings have higher load-carrying capacity and resistance to shock loads. Furthermore, they are lightweight and low cost.
Another name for sleeve bearings is babbitt radial bearings. These bearings are usually made of bronze and have straight inner and outer diameters. They are also impregnated with oil and can withstand radial loads. Typical uses for sleeve bearings are agriculture, automotive and machine tools. Sleeves can also be solid or cored material, depending on the intended use.
The type of sleeve bearing used in the bushing is important in determining which type of bushing to buy. Sleeve bearings are sized based on pressure and speed considerations. Typically, the PV limit is an upper bound on the combined pressure and velocity for a given casing material. In some cases, the sleeve bearing used in the bushing is the same as the plain bearing.
Sleeve bearings are simple in design and made from a variety of materials, including bronze and plastic. They are more affordable than metal, but plastic is still not inaudible. Plastic sleeve bearings will rattle like metal bearings if the gap between the two bushings is not accurate. Additionally, high temperature electronic painting can permanently thin the casing. The stainless steel backing provides a good surface for electronic painting and enhances abrasion resistance.

China Professional bearing factory Customizable GCr15 UCFU209 UCFU208 UCFU207 UCFU206 UCFU205 UCFU204Pillow Block Ball Bearings     drive shaft bearingChina Professional bearing factory Customizable GCr15 UCFU209 UCFU208 UCFU207 UCFU206 UCFU205 UCFU204Pillow Block Ball Bearings     drive shaft bearing
editor by czh 2023-02-20

China High Quality rubber coated ball bearing rubber bearing for trolley drive shaft bearing

Sort: BALL
Construction: Deep Groove
Applicable Industries: Developing Materials Stores, Manufacturing Plant, Restaurant, Printing Retailers
Model Amount: 608ZZ
Precision Score: p0 p6 p5 p4 p2
Seals Type: Open up, Z, ZZ, RS, 2RS
Number of Row: Single row
Thickness: 8mm
Certification: ISO9001:2000
Vibration rank: V1, V2, V3, V4
Tolerance amount: ABEC-1 (P0) ABEC-3 (P6),ABEC-5(P5)
Bearing.substance: Bearing metal,stainless metal
Excess weight: .012kg
Components: Bearing steel,stainless steel
Dimensions: 8*22*7mm
OEM: Take
Packaging Particulars: standard export bundle for the lengthy and rough shipment length or as asked for

Large High quality rubber coated ball bearing rubber bearing for trolley

Our Rewards in the line of bearings basic rubber bearing

1. A lot of many years bearing products producing and exporting encounters.
two. OEM get and non-regular bearing get can be accepted.
three. Numerous dimensions of bearing are accessible. Large quantity bearing can be provided.
4. To regard buyers, you can choose the loading port.
5. A specific amount of cost-free sample can be give to support our customer’s right after-sale solutions and warranty.

Description: deep groove Ball Bearing basic rubber bearing

Deep groove ball bearings are the most widespread Rolling bearings. Its framework is easy and simple to use. Utilized largely for radial load, but when you boost the radial clearance of bearings, has a specified amount of angular make contact with ball bearings, can be subjected to combined radial and axial loads. When in substantial speed and inappropriate use of thrust ball bearings can also be subjected to purely axial hundreds. When compared with other kinds of bearing of the identical measurement, the bearings low friction, high pace restrict. But not shock resistant and must not be subjected to heavy loads
Varieties: deep groove Ball Bearing – simple rubber bearing

– Single row deep groove ball bearings
– Solitary row deep groove ball bearings with filling slots
– Stainless metal deep groove ball bearings
– Double row deep groove ball bearings
– Hybrid deep groove ball bearings
– Deep groove ball bearings for substantial temperature purposes

Application of deep groove ball bearing plain rubber bearing

Deep groove ball bearings can be employed for transmission, instruments, electrical equipment, CZPT 2 stage 57HS22-A Stepper Motor 57HS22 NEMA23 with 2.2Nm torque 5.6A Duration 81mm Shaft 8mm transport vehicles, agricultural machinery, home appliances, inner combustion engines, building machinery, engineering machinery.

some versions of deep groove ball bearing, basic rubber bearing

New ObjectsOld ItemsTechnical specs(dxDxB)Fat/kg
62200five hundred10x30x14.044
6220150112x32x14.053
6220250215x35x14.065
6220350317x40x16.096
6220450420x47x16.143
6220550525×52×18.178
6220650630x62x20.246
6220750735x72x23.396
6220850840x80x23.45
6220950945x85x23.726
6221051050x90x23.726
6221151155×100×25.eighty one
6221251260×110×28
6221351365×120×31one.28
6221451470×125×31
6221551575×130×311.39
6221651680×140×33
6221751785×150×36
6221851890×160×40

Model
ID
(inner diameter)
mm
OD
(outer diameter)
mm
Width B(mm)
Weight
kg
Open up
sealed
604
four
twelve
four
four
.571
605
five
fourteen
5
five
.0037
606
6
17
six
six
.0069
607
7
19
6
six
.0082
608
eight
22
seven
seven
.0129
609
nine
24
seven
seven
.0160
6000
10
26
8
8
.0190
6001
twelve
28
8
eight
.5710
6002
15
32
9
nine
.0300
6003
17
35
10
10
.0390
6004
20
42
12
12
.0690
6005
25
47
12
12
.0800
6006
30
fifty five
13
thirteen
.1160
6007
35
62
14
fourteen
.1550
6008
forty
68
fifteen
fifteen
.1920
6009
forty five
seventy five
sixteen
sixteen
.2450
6571
fifty
eighty
16
sixteen
.2610

Software of deep groove ball bearing: plain rubber bearing

Deep grove ball bearing is typically utilised in auto, tractor, device tool, electrical machine, h2o pump, 59172 F Bearing 360x440x48 mm Solitary Path Thrust Ball Bearing 59172F agriculture equipment, textile equipment, etc.

Varieties of deep groove ball bearing: simple rubber bearing

1. Single row deep groove ball bearing
2. Single row deep groove ball bearing with steel protect
3. Solitary row deep groove ball bearing with steel protect and seal ring
four. Single row deep groove ball bearing with snap groove and snap ring
five. Deep groove ball bearing with filling slot
six. Double row deep groove ball bearing

Packaging & Shipping and delivery
Shipping Phrase:

one. Sample: DHL or other international express.

two. Bulk purchase: By sea or by air.

Payment for bearing:

1. <5000USD: PayPal or Western Union, 100%.

two. >5000USD: T/T or Western Union a hundred% or thirty% in progress, 70% in opposition to copy of B/L.

1.T/T Western Union

two.L/C at sight

three.Shipping Time: 3-ten days upon receipt of deposit

four.Free of charge sample can be sent in 3-5 days

5.Shipping freight are quoted beneath your demands

six.Shipping port:HangZhou/ZheJiang

7.Price reduction are provided based on purchase quantities

Shipping time: 5-twenty five operating days, rely on the amount of buy.

Packing: Solitary plastic, solitary paper box, Carton, Wood Pallet.

some photographs about deep groove ball bearing plain rubber bearing

FAQ

1.How to select bearings?

Normally these variables must be regarded: the bearing size and direction of the load, the nature of the bearing load, self-aligning functionality requirements, bearing rigid demands, bearing functionality requirements, the speed of the bearing doing work setting temperature needs and some other facets such as the prerequisite of bearing axial winding, limits on the measurement of bearing visual appeal, set up and dismantling is practical, the need of the bearing seal and the friction torque, vibration and noise, and so on

two Why select us ?

1.Greatest high quality and most aggressive price—-we are the only 1 manufacture who adopts import uncooked resources. Reduced negative costs, is just .1%.

It is amazing, and with low-cost cost and certain high quality.

2.Delivery quick —–Goods be despatched out inside 7 to 15 days primarily based on get amount.

three.Professional—–We are specific in source and sells, as improvement, strategies, conjugations, and managing.

4.Greatest service—–Answering e-mails or solving questions timely. Shipping and delivery and update info on time. Believe in, T3 600 PTO tractor spare elements cardan pto generate shafts for rotary mower good good quality

and services are the basic of extended time period business.

three Payment conditions:

one.one hundred% TT

two.30% TT of the deposit ,70% ahead of shipping and delivery

three.Western union

four. Paypal (Modest sum )

How to Replace a Bearing

If you want to select a bearing for a specific application, you should know a few basics. This article will give you an overview of ball, angular contact, and sliding-contact bearings. You can choose a bearing according to the application based on the characteristics of its material and preload. If you are not sure how to choose a bearing, try experimenting with it. The next step is to understand the Z-axis, which is the axes along which the bearing moves.

Z axis

When it comes to replacing your Z axis bearing, there are several things you must know. First, you need to make sure that the bearings are seated correctly. Then, you should check the tension and rotation of each one. To ensure that both bearings are equally tensioned, you should flex the Core to the desired angle. This will keep the Z axis perpendicular to the work surface. To do this, first remove the Z axis bearing from its housing and insert it into the Z axis motor plate. Next, insert the flanged bearing into the Z axis motor plate and secure it with two M5x8mm button head cap screws.
Make sure that the bearing plate and the Z Coupler part are flush and have equal spacing. The spacing between the two parts is important, as too much spacing will cause the leadscrew to become tight. The screws should be very loose, with the exception of the ones that engage the nylocks. After installing the bearing, the next step is to start the Z axis. Once this is done, you’ll be able to move it around with a stepper.

Angular contact

bearing
Ball bearings are made with angular contacts that result in an angle between the bearing’s races. While the axial load moves in one direction through the bearing, the radial load follows a curved path, tending to separate the races axially. In order to minimize this frictional effect, angular contact bearings are designed with the same contact angle on the inner and outer races. The contact angle must be chosen to match the relative proportions of the axial and radial loads. Generally, a larger contact angle supports a higher axial load, while reducing radial load.
Ball bearings are the most common type of angular contact bearings. Angular contact ball bearings are used in many applications, but their primary purpose is in the spindle of a machine tool. These bearings are suitable for high-speed, precision rotation. Their radial load capacity is proportional to the angular contact angle, so larger contact angles tend to enlarge with speed. Angular contact ball bearings are available in single and double-row configurations.
Angular contact ball bearings are a great choice for applications that involve axial loads and complex shapes. These bearings have raceways on the inner and outer rings and mutual displacement along the axial axis. Their axial load bearing capacity increases as the contact Angle a rises. Angular contact ball bearings can withstand loads up to five times their initial weight! For those who are new to bearings, there are many resources online dedicated to the subject.
Despite their complexity, angular contact ball bearings are highly versatile and can be used in a wide range of applications. Their angular contact enables them to withstand moderate radial and thrust loads. Unlike some other bearings, angular contact ball bearings can be positioned in tandem to reduce friction. They also feature a preload mechanism that removes excess play while the bearing is in use.
Angular contact ball bearings are made with different lubricants and cage materials. Standard cages for angular contact ball bearings correspond to Table 1. Some are machined synthetic resins while others are molded polyamide. These cage materials are used to further enhance the bearing’s axial load capacity. Further, angular contact ball bearings can withstand high speeds and radial loads. Compared to radial contact ball bearings, angular contact ball bearings offer the greatest flexibility.

Ball bearings

bearing
Ball bearings are circular structures with two separate rings. The smaller ring is mounted on a shaft. The inner ring has a groove on the outer diameter that acts as a path for the balls. Both the inner and outer ring surfaces are finished with very high precision and tolerance. The outer ring is the circular structure with the rolling elements. These elements can take many forms. The inner and outer races are generally made of steel or ceramic.
Silicon nitride ceramic balls have good corrosion resistance and lightweight, but are more expensive than aluminum oxide balls. They also exhibit an insulating effect and are self-lubricating. Silicon nitride is also suitable for high-temperature environments. However, this type of material has the disadvantage of wearing out rapidly and is prone to cracking and shattering, as is the case with bearing steel and glass. It’s also less resistant to heat than aluminum oxide, so it’s best to buy aluminum nitride or ceramic ball bearings for applications that are subjected to extremely high temperatures.
Another type of ball bearings is the thrust bearing. It has a special design that accommodates forces in both axial and radial directions. It is also called a bidirectional bearing because its races are side-by-side. Axial ball bearings use a side-by-side design, and axial balls are used when the loads are transmitted through the wheel. However, they have poor axial support and are prone to separating during heavy radial loads.
The basic idea behind ball bearings is to reduce friction. By reducing friction, you’ll be able to transfer more energy, have less erosion, and improve the life of your machine. With today’s advances in technology, ball bearings can perform better than ever before. From iron to steel to plastics, the materials used in bearings have improved dramatically. Bearings may also incorporate an electromagnetic field. So, it’s best to select the right one for your machine.
The life expectancy of ball bearings depends on many factors, including the operating speed, lubrication, and temperature. A single million-rpm ball bearing can handle between one and five million rotations. As long as its surface contact area is as small as possible, it’s likely to be serviceable for at least one million rotations. However, the average lifespan of ball bearings depends on the application and operating conditions. Fortunately, most bearings can handle a million or more rotations before they start showing signs of fatigue.

Sliding-contact bearings

bearing
The basic principle behind sliding-contact bearings is that two surfaces move in contact with one another. This type of bearing works best in situations where the surfaces are made of dissimilar materials. For instance, a steel shaft shouldn’t run in a bronze-lined bore, or vice versa. Instead, one element should be harder than the other, since wear would concentrate in that area. In addition, abrasive particles tend to force themselves into the softer surface, causing a groove to wear in that part.
Sliding-contact bearings have low coefficients of friction and are commonly used in low-speed applications. Unlike ball and roller bearings, sliding contact bearings have to be lubricated on both sides of the contacting surfaces to minimize wear and tear. Sliding-contact bearings generally are made of ceramics, brass, and polymers. Because of their lower friction, they are less accurate than rolling-element bearings.
Sliding-contact bearings are also known as plain or sleeve bearings. They have a sliding motion between their two surfaces, which is reduced by lubrication. This type of bearing is often used in rotary applications and as guide mechanisms. In addition to providing sliding action, sliding-contact bearings are self-lubricating and have high load-carrying capacities. They are typically available in two different types: plain bearings and thrust bearings.
Sliding-contact linear bearing systems consist of a moving structure (called the carriage or slide) and the surfaces on which the two elements slide. The surfaces on which the bearing and journal move are called rails, ways, or guides. A bore hole is a complex geometry, and a minimum oil film thickness h0 is usually used at the line of centers. It is possible to have a sliding-contact bearing in a pillow block.
Because these bearings are porous, they can absorb 15 to 30% of the lubrication oil. This material is commonly used in automobile and machine tools. Many non-metallic materials are used as bearings. One example is rubber, which offers excellent shock absorbency and embeddability. While rubber has poor strength and thermal conductivity, it is commonly used in deep-well pumps and centrifugal pumps. This material has high impact strength, but is not as rigid as steel.

China High Quality rubber coated ball bearing rubber bearing for trolley     drive shaft bearingChina High Quality rubber coated ball bearing rubber bearing for trolley     drive shaft bearing
editor by czh 2023-02-18

China High precision miniature bearings MR74 472.5mm ball bearing MR74ZZ MR74RS with factory price drive shaft bearing

Type: BALL
Framework: Deep Groove
Applicable Industries: Accommodations, Garment Outlets, Building Content Retailers, Manufacturing Plant, Machinery Restore Stores, Foods & Beverage Manufacturing unit, Farms, Restaurant, House Use, Retail, Meals Shop, Printing Stores, Construction works , ATV flail mower mulcher AT120 with petrol engine Energy & Mining, Foodstuff & Beverage Outlets, Advertising Organization
Bore Size: 3.996 – 4 mm
Model Amount: MR74ZZ(Chrome steel)
Precision Score: PO
Seals Variety: Open up Z, ZZ, RZ,2RZ,RS, 2RS
Quantity of Row: Solitary row
Design: MR74
Dimension: 4*7*2.5mm
inner Bore: 4mm
Outer Diamter: 7mm
Width: 2.5mm
Content: Chrome steel
Bodyweight: .3g
Sample/Stock: Offered
Payment: T/T, Western Union ,paypal
Package deal: Industrial Exporting Packing
Packaging Particulars: Interior Plastic Tube and Outer export carton(about 15kgs every carton measurement:32.5X17.5X15.5cm )As the clients’ need, personalized packing accessible.
Port: HangZhou/Gaungzhou

Higher precision miniature bearings MR74 4*7*2.5mm ball bearing MR74ZZ MR74RS with factory price tag KENTIE Miniature ball bearings are corrosion resistant when exposed to dampness and a number of other media. They can accommodate radial hundreds and axial masses in both directions. These bearings have a decrease load carrying capacity than same-sized bearings made of high chromium steel.MR74 Miniature ball bearings are obtainable open up or capped (with seals or shields). Open bearings that are also available capped, could have recesses in both the internal and outer rings or only in the outer ring.
Technical specs

Bearing ProductMR74
Outer Diameter9mm
Inner Bore3mm
Width4mm
MaterialChrome steel
SealsZZ/RS
LubricationOil/ Grease
PackagePlastic tube
Our Positive aspects 1. Specialist Bearing manufacturer because 19982. Substantial high quality with ISO standards3. Minimal noise, minimal vibration, JK42BLS01 42mm 26W Brushless dc motor with 4000RPM 24V smooth rotation4. Operating temperature selection : centigrade -20 / +805. Higher corrossion reistance, 72 hours salt spray take a look at
In depth Photos As a specialist bearing producer,we make broad selection deep groove ball bearings, especially the stainless metal deep groove ball bearings. All you demands for bearings will be content.
Organization Information Why Choose Us Shipping
Where do we ship?We ship to 143 nations around the world in the world by Specific courier supply,Air transportation,Sea transportationWhen do we ship?All in-inventory orders acquired Monday via Fridays are delivered the identical working day when entire payment acquired.What’s the transit time?For Europe and North America the transit time is 1-2days. For other components of the entire world, relying on the nation, the transit time is between 3-5 days.
FAQ Q1: Are you a Maker or buying and selling company?A: We are expert manufactuer of bearings considering that 1998 with ISO standards.Q2: Can I get a sample to examine out the good quality?A: Positive, free of charge samples are offered for stock items if you can spend for the shipping cost.Q3: Can you do OEM to print my symbol/brand name on the merchandise?A: Indeed, we can print your brand/brand on the merchandise, you just need to have to send us your brand/brand files, we will present you how it seems like.We can also make custom deal to your request.Q4: How before long can I count on my purchase to be completed?A: We have standard stock for normal bearings that can be delivered proper soon after your payment. It will take fifteen-60 times for new creation order, 6900 bering bearing 6202 zz 684-RS 4x9x4mm which relies upon on your buy amount.Q5: What if I get defective goods for my order?A: All our bearings are 100% inspected strictly prior to packing. If any faulty merchandise gained, please supply photographs and video to demonstrate us the issue and help us boost the quality. New items will be despatched to you as replacement if the probelm is product quality.

Types of Ball Bearings

There are several types of ball bearings: Double-row angular contact, Four-point contact, Self-aligning, and Ceramic hybrid. Here’s a brief description of each. For more information, read our article about Double-row angular contact ball bearings. You’ll be better informed about how they’re made. Also, learn about how the cages that hold the balls in place are secured with rivets.

Double-row, angular-contact bearing

Double-row, angular-contact ball bearings are similar in their contact surfaces in one direction, and the two pairs of bearings are installed axially opposite to one another. This design allows them to support combined loads in axial and radial directions. These types of bearings are used for high-precision, high-speed applications. They can be used in everything from turbines to dentistry equipment. Double-row, angular-contact bearings are available at Grainger, as are single-row versions.
Double-row, angular-contact ball bearings are a popular option for applications where high precision and high speed are required. The design features of these bearings are ideal for applications with axial space restrictions. In contrast, they are smaller than two single-row angular-contact bearings and are available in steel, polyamide, or brass cages. Whether you need a cage for high speed or hard operating conditions is up to you. If you are unsure about the right cage for your application, contact Schaeffler.
Single-row angular-contact ball bearings are the most common type of bearings. Double-row bearings are also available with a shielded outer ring, which protects the balls inside the bearing from external contaminants. Because these double-row bearings are a good choice for applications requiring high performance, they are often the most affordable option. They offer similar performance as single-row bearings but are much more rigid.
Preloading is a key performance characteristic for double-row angular-contact ball bearings. Preloading can decrease the service life of double-row angular-contact ball bearings by up to 380 percent. Alternatively, you can preload double-row angular-contact ball bearings by placing spacers between their outer rings. Good double-row angular-contact bearing installation will increase working accuracy and bearing life.
bearing

Four-point contact ball bearing

The Four Point Contact Ball Bearing Market can be segmented into three types: 35 Degree, 45 Degree, and Other. The 35 Degree segment is expected to witness the fastest growth over the next few years, owing to its increased operational speed and competence in axial and radial axis load handling. Other types of four-point contact ball bearings include the Miniature and Deep Groove varieties. These are widely used in automobiles, aerospace, and other industries.
These bearings are designed for oil-free screw compressors, and they feature an outer-ring guided brass cage to reduce friction and increase running accuracy. In addition, they have lower maintenance costs compared to conventional bearings. However, they have a higher mean roughness value than their counterparts. High-speed operations require high-speed bearings that can withstand fast speed changes. This is because of the higher friction rate, which results from four-point contact.
The Four-Point Contact Ball Bearing is a highly versatile product, as it can handle radial, thrust, and moment loads. Because of this, it is often the first choice for slow to moderate-speed applications. This design also has a simplified assembly process, requiring only a single double-half-turn to install. It is the first choice of many automotive OEMs because it is extremely efficient. If you want a ball bearing with these benefits, you should contact a local bearing company.
The Four-Point Contact Ball Bearing Market will continue to grow despite a tough economy and volatile trade conditions. Demand for automotive and aerospace components is expected to grow alongside a variety of technological advancements. Meanwhile, demand for energy-efficient products will continue to increase with changes in trade policy, an imbalance in the supply-side ecosystem, and geopolitical risk. And while all these factors will continue to drive the market growth, a few challenges are worth considering.
The Four-Point Contact Bearing is designed with the same basic structure as its two-point counterpart. In a four-point contact ball bearing, one ball can have four distinct points of contact with two rings. Two of these contact points may be in diagonal position. The two remaining contact points change position and accommodate radial loads. Consequently, the Four-Point Contact Bearing is more flexible and robust than its two-point counterparts.
bearing

Self-aligning ball bearing

The self-aligning ball bearing is an incredibly useful tool in many industries. This type of bearing has a sealing lip that makes contact with a smooth chamfer on the inner ring. Because of the self-aligning nature of these bearings, they are not prone to misalignment. They can withstand temperatures ranging from -30°C to 120°C and should not be heated prior to installation.
A self-aligning ball bearing is an elastomer-based spherical-shaped bearing with two rows of rolling elements. These bearings can accommodate large radial loads, and their outer ring raceway is curved to provide a spherical effect. The inner ring, or cage, can be either cylindrical or conical. The inner diameter of a self-aligning ball bearing is normally cylindrical, but some are conical. They typically have three oil holes.
When choosing a self-aligning ball bearing, look for a model with a large enough bearing diameter to accommodate the shaft’s bending. Self-aligning bearings may also be interchangeable with standard ball bearing assemblies. You can find individual values in manufacturer catalogues. These bearings are useful in limited applications, although they are not necessarily ideal for everything. For example, in applications where combined loads are the main concern, self-aligning ball bearings should only be used if the application requires minimal misalignment.
A self-aligning ball bearing is a highly-efficient, energy-efficient solution for a variety of applications. It is a simple, low-maintenance solution that makes your life easier. Its unique outer raceway allows restraining springs to absorb the deflection that is common in other bearings. The result is a cooler, smoother running vehicle. It also helps prevent misalignment, which makes it ideal for use in many applications.
The SKF self-aligning ball bearing is an excellent choice for applications involving heavy deflection of the shaft. They are the lowest-friction bearing available. Their steel plate reinforced seals prevent them from separating from the shaft during operation. They are also resistant to oil, making them the perfect solution for high-speed applications. In addition to this, they are designed to work in a wide range of temperatures.
bearing

Ceramic hybrid ball bearing

A hybrid ball bearing made from a combination of steel and ceramics is a good option for high-speed applications requiring electrical isolation. This combination offers an extended lifespan and minimal electrical corrosion or seizure risk. In addition, the hybrid ball bearings have less friction than steel bearings and can operate at low speeds. To learn more about this hybrid type of bearing, continue reading. We’ll also discuss how it can help your application.
Full ceramic balls are generally harder than steel, but they do have lower density, meaning they’re not subject to the same high centrifugal forces as steel balls. These benefits make ceramic ball bearings much more durable, with long lifespans. Both full and hybrid ceramic ball bearings are available from CZPT. Read on to learn more about each type. Here’s a look at some of the benefits of each. You’ll be pleasantly surprised.
A hybrid ball bearing consists of steel inner and outer rings and a ceramic ball. It can withstand high speeds and loads, but it’s also designed to operate in extreme temperatures. This hybrid ball bearing also requires minimal lubrication and is suitable for a variety of applications. Because of its unique characteristics, hybrid bearings are lightweight and hard, and they spin faster than steel balls. But how do you choose the right one for your application?
A ceramic ball bearing is better than a steel one for many applications. Its greater speed capability and lower friction allow it to operate at higher speeds than steel balls. It is also less sensitive to fluctuations in lubrication conditions than steel balls. They also tend to be cheaper, so it makes sense to invest in one. It’s worth your while. They last longer, and they don’t require a run-in period.
A hybrid ball bearing is the best choice for electric spindles with high speed and heavy loads. A hybrid ceramic ball bearing has the advantage of low heat and high stiffness, and can operate at high speeds and loads. This thesis explores the dynamic characteristics of a hybrid ceramic ball bearing, including analysis calculations and experiment verification. The results provide reliable data and lay the foundation for professional spindle optimum design tests. It is a worthy addition to any machine shop.

China High precision miniature bearings MR74 472.5mm ball bearing MR74ZZ MR74RS with factory price     drive shaft bearingChina High precision miniature bearings MR74 472.5mm ball bearing MR74ZZ MR74RS with factory price     drive shaft bearing
editor by czh 2023-02-18

China Main Bearing Std (3802070) for Cummins Engine Parts drive shaft bearing

Product Description

Primary Bearing STD (3857170) for CZPT Engine Areas

ABOUT CZPT Team

ZheJiang CZPT Science and Technology Co., Ltd. (Hongjun) is the chinese major one particular-cease provider of spare elements for large equipment, maritime and large trucks! Dependent on its extensive network , CZPT is CZPT to offer the most satisfying one-end services for its clients!

To Be Negotiated 100 Pieces
(Min. Order)

###

Certification: CCC, COP, ISO9001, CE
Standard Component: Standard Component
Material: Aluminum
Type: Main Bearing Std
Transport Package: Wooden Packing Box
Specification: 3802070

###

Customization:
To Be Negotiated 100 Pieces
(Min. Order)

###

Certification: CCC, COP, ISO9001, CE
Standard Component: Standard Component
Material: Aluminum
Type: Main Bearing Std
Transport Package: Wooden Packing Box
Specification: 3802070

###

Customization:

Bushing Application, Type and Compression Capability

Bushings are cylindrical bushings used in machinery. It prevents wear of moving parts and is often used as an enclosure. Bushings are also known as plain bearings or sleeve bearings. You may be wondering what these parts do and how they work, but this article aims to answer all your questions. We’ll cover bushing applications, types and compression capabilities so you can choose the right one for your needs.
bushing

application

A bushing is a mechanical component that plays an important role in many different fields. In addition to being very practical, it helps reduce noise, vibration, wear and provides anti-corrosion properties. These properties help mechanical equipment in various ways, including making it easier to maintain and reducing its overall structure. The functionality of an enclosure depends on its purpose and environment. This article will discuss some of the most common applications of casing.
For example, in an aircraft, the bushing assembly 16 may be used for the bulkhead isolator 40 . The bushing assembly 16 provides the interfaces and paths required for current flow. In this manner, the sleeve assembly provides a secure, reliable connection between two objects with different electrical charges. They also prevent sparking by increasing the electrical conductivity of the component and reducing its resistivity, thereby minimizing the chance of spark formation.
Another common application for bushings is as a support shaft. Unlike bearings, bushings operate by sliding between two moving surfaces. As a result, they reduce friction and handling stress, reducing overall maintenance costs. Typically, the bushing is made of brass or bronze. The benefits of bushings are similar to those of bearings. They help extend the life of rotating machines by reducing frictional energy loss and wear.
In addition to identifying growth opportunities and minimizing risks, the Bushing Anti-Vibration Mounts Market report provides insights into the dynamics of the industry and its key players. The report covers global market size, applications, growth prospects, challenges and regional forecasts. The detailed section on Bushing Anti-Vibration Mounts industry provides insights on demand and supply along with competitive analysis at regional and country level.

type

There are several types of bushings. Among them, the SF6 insulating sleeve has the simplest structure and is based on composite hollow insulators. It also has several metal shielding cylinders for regulating the electric field within the enclosure and another for grounding the metal shield. In addition to being lightweight, this sleeve is also very durable, but the diameter of its shield electrode is very large, which means special installation and handling procedures are required.
Linear bushings are usually pressed into the bore of the shaft and provide support as the shaft moves in/out. Non-press-fit bushings are held in place by snap rings or pins. For certain applications, engineers often choose bushings over bearings and vice versa. That’s why. Below are some common bushing types. If you need to buy, make sure you know how to tell them apart.
OIP bushings are used for oil-filled cable boxes, and oil-to-oil bushings are used for EHV power transformers. The main components of the OIP enclosure are shown in Figure 7a. If you are considering this type of bushing for your specific application, you need to make sure you understand your specific requirements. You can also consult your local engineering department for more information.
All types of bushings should be tested for IR and capacitance. The test tap should be securely attached to the bushing flange. If damaged bushings are found, replace them immediately. Be sure to keep complete records of the enclosure for routine maintenance and any IR testing. Also, be sure to pay attention to tan d and thermal vision measurements.
bushing

Compressive ability

There are several things to consider when choosing an enclosure. First, the material. There are two main types of bushings: those made of filled Teflon and those made of polyester resin. The former has the highest compressive strength, while the latter has a lower compressive capacity. If you need small amounts, glass-filled nylon bushings are the most common and best option. Glass-filled nylon is an economical material with a compressive strength of 36,000 lbs.
Second, the material used for the enclosure must be able to withstand the load. For example, bronze bushings can cause metal shavings to fall into the papermaking process. CG materials can withstand very high levels of moisture, which can damage bushings that require lubrication. Additionally, these materials can operate for extended periods of time without lubrication. This is particularly advantageous in the paper industry, since the casing operates in a humid environment.
In addition to the material and its composition, other characteristics of the enclosure must also be considered, including its operating temperature. Although frictional heat from moving loads and the temperature of the bushing itself can affect the performance of the bushing, these factors determine its service life. For high temperature applications, the PV of the enclosure should be kept low. On the other hand, plastic bushings are generally less heat resistant than metal bushings. In addition, plastic sleeves have a high rate of thermal expansion. To avoid this, size control is also important.
Low pressure bushings have different requirements. An 800 MVA installation requires a low voltage bushing rated at 14 000 A. The palm assembly of the transformer also features a large central copper cylinder for electrical current. The bushing must withstand this amount of current and must maintain an even distribution of current in the transformer tank. If there is a leak, the bushing must be able to resist the leak so as not to damage the transformer.

cost

The cost of new control arm bushings varies widely. Some parts are cheaper than others, and a new part is only $200. However, if you replace the four control bushings in your car, the cost can exceed $1,200. The cost breakdown for each section is listed below. If you plan to replace all four, the cost of each bushing may range from $200 to $500.
The control arm bushing bears the brunt of the forces generated by the tire and is parallel to the direction of the force. However, over time, these components wear out and need to be replaced. Replacing one control arm bushing costs between $300 and $1,200. However, the cost of replacing each arm bushing depends on your car model and driving habits. The control arm bushings should last about 100,000 miles before needing replacement.
The repair process for control arm bushings is time consuming and expensive. Also, they may need to remove the heat shield or bracket. In either case, the procedure is simple. Stabilizer bar brackets are usually attached with one or two mounting bolts. They can also be secured with nuts or threaded holes. All you need is a wrench to remove them.
The control arm bushings are made of two metal cylinders and a thick rubber bushing. These parts can deteriorate from potholes, off-roading or accidents. Because they are made of rubber, the parts are more expensive than new. Buying used ones can save you money because you don’t need to install them yourself. However, if you do plan on fixing a luxury car yourself, be sure to find one that has a warranty and warranty.
bushing

maintain

To prevent your vehicle from overheating and leaking oil, a properly functioning bushing must be used. If the oil level is too low, you will need to check the mounting bolts to make sure they are properly tightened. Check gasket to ensure proper compression is applied, replace bushing if necessary. You should notify your vehicle manufacturer if your vehicle is immersed in oil. Whenever an oil leak occurs, it is very important to replace the oil-filled bushing.
Another important aspect of bushing maintenance is the detection and correction of partial discharges. Partial discharge is caused by current entering the bushing. Partial discharge can cause tree-like structures, cracks and carbonization in the discharge channel, which can eventually damage the casing. Early detection of these processes is critical to ensuring that your vehicle’s bushings are properly maintained. Identifying and repairing partial discharges is critical to ensuring optimal operation, regardless of the type of pump or motor.
To diagnose casing condition, perform several tests. You can use tan d measurement, which is a powerful tool for detecting the ingress of water and moisture. You can also use power factor measurements to detect localized defects and aging effects. You can also check the oil level by performing an infrared check. After completing these tests, you will be able to determine if there is enough oil in the casing.
If the oil level in the transformer is too low, water and air may leak into the transformer. To avoid this problem, be sure to check the MOG and transformer oil levels. If the silicone is pink, replace it. You should also check the function of the oil pump, fan and control circuits annually. Check the physical condition of the pump and fan and whether they need to be replaced. Clean the transformer bushing with a soft cotton cloth and inspect for cracks.

China Main Bearing Std (3802070) for Cummins Engine Parts     drive shaft bearingChina Main Bearing Std (3802070) for Cummins Engine Parts     drive shaft bearing
editor by czh 2023-01-25

China Ucf Pillow Block Bearing for Agricultural Machinery Bearings drive shaft bearing

Merchandise Description

Fast OVERVIEW
 

Design UCP  UCF UCT  UCFL NAFU UCFC  UCPA  SER SA SB
Greese/Oil As you necessity, this sort of as SRL ,PS2, Alvania R12 and so on.
Vibration Z1/V1,Z2/V2,Z3/V3
Hardness HRC60~HRC63
Bearing type GCR15 Material (Chrome Steel) self-aligning ball bearings
Quality degree Get to the identical degree as Japanes and European bearings, P0 P2 P4 P5 P6..
Function lower voice,large velocity,long existence
Software Pharmaceutical products, health-related tools, textile machinery
 
and equipment, knitting machines, weaving machines, spinning
 
equipment, textile equipment, non-woven fabric equipment,
 
textile products, equipment, metal, mildew, automotive
 
electronics, electrical, instrumentation, military, aviation
 
aerospace, plastics and rubber industry, healthcare and other fields.
Package 1,barreled bundle+outer carton+pallets 
2,solitary box+outer carton+pallets 
3,tube deal+center box+outer carton+pallets 
4,According to your’s prerequisite
Particulars We have comprehensive method for the production and top quality assurance to make sure our merchandise can satisfy your necessity.
one.Assembly
two.Windage take a look at
3.Cleaning
four.Rotary take a look at
5.Greasing and gland
6.Noise inspection
seven.Appearance inspection
8.Rust avoidance

Pillow block bearing is truly a variant of the deep groove ball bearing. Its characteristic is that its outer ring outer diameter surface area is a spherical area, which can be fitted into the corresponding concave spherical area of the bearing seat to engage in the function of centering. The outer spherical bearing is mostly utilized to bear the merged radial and axial load based on the radial load, and it is generally not appropriate to bear the axial load by yourself. Outer spherical bearings are preferentially suited for situations that call for straightforward equipment and parts, this kind of as agricultural equipment, transportation methods or design machinery.

Pictures

Model Checklist
 

UC201 UCP201 UCF201 UCFL201 UCT201 UCFC201 UCPA201
UC201-eight UCP201-8 UCF201-eight UCFL201-8 UCT201-eight UCFC201-8 UCPA201-8
UC202 UCP202 UCF202 UCFL202 UCT202 UCFC202 UCPA202
UC202-ten UCP202-10 UCF202-10 UCFL202-10 UCT202-10 UCFC202-ten UCPA202-ten
UC203 UCP203 UCF203 UCFL203 UCT203 UCFC203 UCPA203
UC204 UCP204 UCF204 UCFL204 UCT204 UCFC204 UCPA204
UC204-twelve UCP204-twelve UCF204-12 UCFL204-12 UCT204-12 UCFC204-twelve UCPA204-12
UC205 UCP205 UCF205 UCFL205 UCT205 UCFC205 UCPA205
UC205-14 UCP205-fourteen UCF205-fourteen UCFL205-14 UCT205-14 UCFC205-fourteen UCPA205-14
UC205-15 UCP205-fifteen UCF205-fifteen UCFL205-15 UCT205-15 UCFC205-fifteen UCPA205-15
UC205-16 UCP205-sixteen UCF205-16 UCFL205-16 UCT205-sixteen UCFC205-sixteen UCPA205-sixteen
UC206 UCP206 UCF206 UCFL206 UCT206 UCFC206 UCPA206
UC206-eighteen UCP206-18 UCF206-18 UCFL206-18 UCT206-18 UCFC206-18 UCPA206-eighteen
UC206-19 UCP206-19 UCF206-19 UCFL206-19 UCT206-19 UCFC206-19 UCPA206-19
UC206-20 UCP206-20 UCF206-twenty UCFL206-20 UCT206-twenty UCFC206-twenty UCPA206-20
UC207 UCP207 UCF207 UCFL207 UCT207 UCFC207 UCPA207
UC207-twenty UCP207-twenty UCF207-twenty UCFL207-twenty UCT207-twenty UCFC207-twenty UCPA207-20
UC207-21 UCP207-21 UCF207-21 UCFL207-21 UCT207-21 UCFC207-21 UCPA207-21
UC207-22 UCP207-22 UCF207-22 UCFL207-22 UCT207-22 UCFC207-22 UCPA207-22
UC207-23 UCP207-23 UCF207-23 UCFL207-23 UCT207-23 UCFC207-23 UCPA207-23
UC208 UCP208 UCF208 UCFL208 UCT208 UCFC208 UCPA208
UC208-24 UCP208-24 UCF208-24 UCFL208-24 UCT208-24 UCFC208-24 UCPA208-24
UC209 UCP209 UCF209 UCFL209 UCT209 UCFC209 UCPA209
UC209-26 UCP209-26 UCF209-26 UCFL209-26 UCT209-26 UCFC209-26 UCPA209-26
UC209-27 UCP209-27 UCF209-27 UCFL209-27 UCT209-27 UCFC209-27 UCPA209-27
UC209-28 UCP209-28 UCF209-28 UCFL209-28 UCT209-28 UCFC209-28 UCPA209-28
             
UC210 UCP210 UCF210 UCFL210 UCT210 UCFC210 UCPA210
UC210-thirty UCP210-thirty UCF210-thirty UCFL210-30 UCT210-thirty UCFC210-30 UCPA210-thirty
UC210-31 UCP210-31 UCF210-31 UCFL210-31 UCT210-31 UCFC210-31 UCPA210-31
UC210-32 UCP210-32 UCF210-32 UCFL210-32 UCT210-32 UCFC210-32 UCPA210-32
UC211 UCP211 UCF211 UCFL211 UCT211 UCFC211 UCPA211
UC211-32 UCP211-32 UCF211-32 UCFL211-32 UCT211-32 UCFC211-32 UCPA211-32
UC211-34 UCP211-34 UCF211-34 UCFL211-34 UCT211-34 UCFC211-34 UCPA211-34
UC211-35 UCP211-35 UCF211-35 UCFL211-35 UCT211-35 UCFC211-35 UCPA211-35
UC212 UCP212 UCF212 UCFL212 UCT212 UCFC212 UCPA212
UC212-36 UCP212-36 UCF212-36 UCFL212-36 UCT212-36 UCFC212-36 UCPA212-36
UC212-38 UCP212-38 UCF212-38 UCFL212-38 UCT212-38 UCFC212-38 UCPA212-38
UC212-39 UCP212-39 UCF212-39 UCFL212-39 UCT212-39 UCFC212-39 UCPA212-39
UC213 UCP213 UCF213 UCFL213 UCT213 UCFC213  
UC213-40 UCP213-forty UCF213-40 UCFL213-forty UCT213-forty UCFC213-40  
UC214 UCP214 UCF214 UCFL214 UCT214 UCFC214  
UC214-44 UCP214-44 UCF214-44 UCFL214-44 UCT214-44 UCFC214-forty four  
UC215 UCP215 UCF215 UCFL215 UCT215 UCFC215  
UC215-47 UCP215-forty seven UCF215-47 UCFL215-47 UCT215-forty seven UCFC215-47  
UC215-48 UCP215-48 UCF215-forty eight UCFL215-48 UCT215-48 UCFC215-forty eight  
UC216 UCP216 UCF216 UCFL216 UCT216 UCFC216  
UC217 UCP217 UCF217 UCFL217 UCT217 UCFC217  
UC218 UCP218 UCF218 UCFL218 UCT218 UCFC218  
UC218-fifty six UCP218-56 UCF218-56 UCFL218-fifty six UCT218-fifty six UCFC218-fifty six  
  UCP220 UCF220        
             
UC305 UCP305 SA201 SB201 UK205 NA204 UKP205
UC306 UCP306 SA202 SB202 UK206 NA205 UKP206
UC307 UCP307 SA203 SB203 UK207 NA206 UKP207
UC308 UCP308 SA204 SB204 UK208 NA207 UKP208
UC309 UCP309 SA205 SB205 UK209 NA208 UKP209
UC310 UCP310 SA206 SB206 UK210 NA209 UKP210
UC311 UCP311 SA207 SB207 UK211 NA210 UKP211
UC312 UCP312 SA208 SB208 UK212   UKP212
UC313 UCP313 SA209 SB209 UK213   UKP213
UC314 UCP314 SA210 SB210 UK215   UKP215
UC315 UCP315     UK216   UKP216
UC316 UCP316     UK217   UKP217
UC317       UK218   UKP218
UC318            
UC319            
UC320            

 

A vast range of programs:

• agriculture and forestry products
• automotive and industrial gearboxes
• automotive and truck electric components, such as alternators
• electrical motors
• fluid equipment
• content managing
• electricity tools and household appliances
• textile equipment
• two Wheeler.
 

Our Bearing Advantage:

one.ISO Standard

two.Bearing Modest purchase accepted

three.In Stock bearing

four.OEM bearing service

5.Skilled:20 years manufacture bearing

six.Personalized bearing, Customer’s bearing drawing or samples approved

seven.Competitive price bearing

8.TT Payment or Western Union or PayPal

Our Company

Packaging Information one piece in a one box
50 packing containers in a carton
twenty cartons in a pallet
Closest Port ZheJiang or HangZhou
Lead Time For inventory areas: 1-5 times.
If no stock components:
<200 pcs: 15-30 days
≥200 pcs: to be negotiated.

FAQ

one.How do you make our enterprise lengthy-term and very good relationship? 
– We keep great quality and competitive price tag to make sure our buyers benefit
– We respect every single client as our buddy and we sincerely do organization and make buddies with them,
  no issue exactly where they arrive from.

 

2.Do you check all your merchandise ahead of shipping and delivery?
– Sure, we have one hundred% check ahead of shipping

 

three.What products does your organization offer?
– Automobile Bearings (Wheel Bearings, Wheel Hub Bearings, Clutch Bearings, Belt Tensioners and Water Pump Bearings and so on. )    

-Industrial Bearings (Deep Groove Ball Bearings, Tapered Roller Bearings and Pillow Block Bearings).
 

US $3-10
/ Set
|
10 Sets

(Min. Order)

###

Aligning: Aligning Bearing
Separated: Separated
Feature: Vacuum, Magnetically, Low Temperature, Corrosion Resistant, High Temperature, High Speed
Rows Number: Single
Raceway: Deep Groove Raceway
Material: Gcr15/Carbon Steel/Ceramic/Plastic

###

Samples:
US$ 3/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Model UCP  UCF UCT  UCFL NAFU UCFC  UCPA  SER SA SB
Greese/Oil As you requirement, such as SRL ,PS2, Alvania R12 and so on.
Vibration Z1/V1,Z2/V2,Z3/V3
Hardness HRC60~HRC63
Bearing type GCR15 Material (Chrome Steel) self-aligning ball bearings
Quality level Reach the same level as Japanes and European bearings, P0 P2 P4 P5 P6..
Feature low voice,high speed,long life
Application Pharmaceutical equipment, medical equipment, textile machinery
 
and accessories, knitting machines, weaving machines, spinning
 
equipment, textile accessories, non-woven fabric machinery,
 
textile equipment, machinery, metal, mold, automotive
 
electronics, electrical, instrumentation, military, aviation
 
aerospace, plastics and rubber industry, medical and other fields.
Package 1,barreled package+outer carton+pallets 
2,single box+outer carton+pallets 
3,tube package+middle box+outer carton+pallets 
4,According to your’s requirement
Details We have complete process for the production and quality assurance to make sure our products can meet your requirement.
1.Assembly
2.Windage test
3.Cleaning
4.Rotary test
5.Greasing and gland
6.Noise inspection
7.Appearance inspection
8.Rust prevention

###

UC201 UCP201 UCF201 UCFL201 UCT201 UCFC201 UCPA201
UC201-8 UCP201-8 UCF201-8 UCFL201-8 UCT201-8 UCFC201-8 UCPA201-8
UC202 UCP202 UCF202 UCFL202 UCT202 UCFC202 UCPA202
UC202-10 UCP202-10 UCF202-10 UCFL202-10 UCT202-10 UCFC202-10 UCPA202-10
UC203 UCP203 UCF203 UCFL203 UCT203 UCFC203 UCPA203
UC204 UCP204 UCF204 UCFL204 UCT204 UCFC204 UCPA204
UC204-12 UCP204-12 UCF204-12 UCFL204-12 UCT204-12 UCFC204-12 UCPA204-12
UC205 UCP205 UCF205 UCFL205 UCT205 UCFC205 UCPA205
UC205-14 UCP205-14 UCF205-14 UCFL205-14 UCT205-14 UCFC205-14 UCPA205-14
UC205-15 UCP205-15 UCF205-15 UCFL205-15 UCT205-15 UCFC205-15 UCPA205-15
UC205-16 UCP205-16 UCF205-16 UCFL205-16 UCT205-16 UCFC205-16 UCPA205-16
UC206 UCP206 UCF206 UCFL206 UCT206 UCFC206 UCPA206
UC206-18 UCP206-18 UCF206-18 UCFL206-18 UCT206-18 UCFC206-18 UCPA206-18
UC206-19 UCP206-19 UCF206-19 UCFL206-19 UCT206-19 UCFC206-19 UCPA206-19
UC206-20 UCP206-20 UCF206-20 UCFL206-20 UCT206-20 UCFC206-20 UCPA206-20
UC207 UCP207 UCF207 UCFL207 UCT207 UCFC207 UCPA207
UC207-20 UCP207-20 UCF207-20 UCFL207-20 UCT207-20 UCFC207-20 UCPA207-20
UC207-21 UCP207-21 UCF207-21 UCFL207-21 UCT207-21 UCFC207-21 UCPA207-21
UC207-22 UCP207-22 UCF207-22 UCFL207-22 UCT207-22 UCFC207-22 UCPA207-22
UC207-23 UCP207-23 UCF207-23 UCFL207-23 UCT207-23 UCFC207-23 UCPA207-23
UC208 UCP208 UCF208 UCFL208 UCT208 UCFC208 UCPA208
UC208-24 UCP208-24 UCF208-24 UCFL208-24 UCT208-24 UCFC208-24 UCPA208-24
UC209 UCP209 UCF209 UCFL209 UCT209 UCFC209 UCPA209
UC209-26 UCP209-26 UCF209-26 UCFL209-26 UCT209-26 UCFC209-26 UCPA209-26
UC209-27 UCP209-27 UCF209-27 UCFL209-27 UCT209-27 UCFC209-27 UCPA209-27
UC209-28 UCP209-28 UCF209-28 UCFL209-28 UCT209-28 UCFC209-28 UCPA209-28
             
UC210 UCP210 UCF210 UCFL210 UCT210 UCFC210 UCPA210
UC210-30 UCP210-30 UCF210-30 UCFL210-30 UCT210-30 UCFC210-30 UCPA210-30
UC210-31 UCP210-31 UCF210-31 UCFL210-31 UCT210-31 UCFC210-31 UCPA210-31
UC210-32 UCP210-32 UCF210-32 UCFL210-32 UCT210-32 UCFC210-32 UCPA210-32
UC211 UCP211 UCF211 UCFL211 UCT211 UCFC211 UCPA211
UC211-32 UCP211-32 UCF211-32 UCFL211-32 UCT211-32 UCFC211-32 UCPA211-32
UC211-34 UCP211-34 UCF211-34 UCFL211-34 UCT211-34 UCFC211-34 UCPA211-34
UC211-35 UCP211-35 UCF211-35 UCFL211-35 UCT211-35 UCFC211-35 UCPA211-35
UC212 UCP212 UCF212 UCFL212 UCT212 UCFC212 UCPA212
UC212-36 UCP212-36 UCF212-36 UCFL212-36 UCT212-36 UCFC212-36 UCPA212-36
UC212-38 UCP212-38 UCF212-38 UCFL212-38 UCT212-38 UCFC212-38 UCPA212-38
UC212-39 UCP212-39 UCF212-39 UCFL212-39 UCT212-39 UCFC212-39 UCPA212-39
UC213 UCP213 UCF213 UCFL213 UCT213 UCFC213  
UC213-40 UCP213-40 UCF213-40 UCFL213-40 UCT213-40 UCFC213-40  
UC214 UCP214 UCF214 UCFL214 UCT214 UCFC214  
UC214-44 UCP214-44 UCF214-44 UCFL214-44 UCT214-44 UCFC214-44  
UC215 UCP215 UCF215 UCFL215 UCT215 UCFC215  
UC215-47 UCP215-47 UCF215-47 UCFL215-47 UCT215-47 UCFC215-47  
UC215-48 UCP215-48 UCF215-48 UCFL215-48 UCT215-48 UCFC215-48  
UC216 UCP216 UCF216 UCFL216 UCT216 UCFC216  
UC217 UCP217 UCF217 UCFL217 UCT217 UCFC217  
UC218 UCP218 UCF218 UCFL218 UCT218 UCFC218  
UC218-56 UCP218-56 UCF218-56 UCFL218-56 UCT218-56 UCFC218-56  
  UCP220 UCF220        
             
UC305 UCP305 SA201 SB201 UK205 NA204 UKP205
UC306 UCP306 SA202 SB202 UK206 NA205 UKP206
UC307 UCP307 SA203 SB203 UK207 NA206 UKP207
UC308 UCP308 SA204 SB204 UK208 NA207 UKP208
UC309 UCP309 SA205 SB205 UK209 NA208 UKP209
UC310 UCP310 SA206 SB206 UK210 NA209 UKP210
UC311 UCP311 SA207 SB207 UK211 NA210 UKP211
UC312 UCP312 SA208 SB208 UK212   UKP212
UC313 UCP313 SA209 SB209 UK213   UKP213
UC314 UCP314 SA210 SB210 UK215   UKP215
UC315 UCP315     UK216   UKP216
UC316 UCP316     UK217   UKP217
UC317       UK218   UKP218
UC318            
UC319            
UC320            

###

Packaging Details 1 piece in a single box
50 boxes in a carton
20 cartons in a pallet
Nearest Port Shanghai or Ningbo
Lead Time For stock parts: 1-5 days.
If no stock parts:
<200 pcs: 15-30 days
200 pcs: to be negotiated.
US $3-10
/ Set
|
10 Sets

(Min. Order)

###

Aligning: Aligning Bearing
Separated: Separated
Feature: Vacuum, Magnetically, Low Temperature, Corrosion Resistant, High Temperature, High Speed
Rows Number: Single
Raceway: Deep Groove Raceway
Material: Gcr15/Carbon Steel/Ceramic/Plastic

###

Samples:
US$ 3/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Model UCP  UCF UCT  UCFL NAFU UCFC  UCPA  SER SA SB
Greese/Oil As you requirement, such as SRL ,PS2, Alvania R12 and so on.
Vibration Z1/V1,Z2/V2,Z3/V3
Hardness HRC60~HRC63
Bearing type GCR15 Material (Chrome Steel) self-aligning ball bearings
Quality level Reach the same level as Japanes and European bearings, P0 P2 P4 P5 P6..
Feature low voice,high speed,long life
Application Pharmaceutical equipment, medical equipment, textile machinery
 
and accessories, knitting machines, weaving machines, spinning
 
equipment, textile accessories, non-woven fabric machinery,
 
textile equipment, machinery, metal, mold, automotive
 
electronics, electrical, instrumentation, military, aviation
 
aerospace, plastics and rubber industry, medical and other fields.
Package 1,barreled package+outer carton+pallets 
2,single box+outer carton+pallets 
3,tube package+middle box+outer carton+pallets 
4,According to your’s requirement
Details We have complete process for the production and quality assurance to make sure our products can meet your requirement.
1.Assembly
2.Windage test
3.Cleaning
4.Rotary test
5.Greasing and gland
6.Noise inspection
7.Appearance inspection
8.Rust prevention

###

UC201 UCP201 UCF201 UCFL201 UCT201 UCFC201 UCPA201
UC201-8 UCP201-8 UCF201-8 UCFL201-8 UCT201-8 UCFC201-8 UCPA201-8
UC202 UCP202 UCF202 UCFL202 UCT202 UCFC202 UCPA202
UC202-10 UCP202-10 UCF202-10 UCFL202-10 UCT202-10 UCFC202-10 UCPA202-10
UC203 UCP203 UCF203 UCFL203 UCT203 UCFC203 UCPA203
UC204 UCP204 UCF204 UCFL204 UCT204 UCFC204 UCPA204
UC204-12 UCP204-12 UCF204-12 UCFL204-12 UCT204-12 UCFC204-12 UCPA204-12
UC205 UCP205 UCF205 UCFL205 UCT205 UCFC205 UCPA205
UC205-14 UCP205-14 UCF205-14 UCFL205-14 UCT205-14 UCFC205-14 UCPA205-14
UC205-15 UCP205-15 UCF205-15 UCFL205-15 UCT205-15 UCFC205-15 UCPA205-15
UC205-16 UCP205-16 UCF205-16 UCFL205-16 UCT205-16 UCFC205-16 UCPA205-16
UC206 UCP206 UCF206 UCFL206 UCT206 UCFC206 UCPA206
UC206-18 UCP206-18 UCF206-18 UCFL206-18 UCT206-18 UCFC206-18 UCPA206-18
UC206-19 UCP206-19 UCF206-19 UCFL206-19 UCT206-19 UCFC206-19 UCPA206-19
UC206-20 UCP206-20 UCF206-20 UCFL206-20 UCT206-20 UCFC206-20 UCPA206-20
UC207 UCP207 UCF207 UCFL207 UCT207 UCFC207 UCPA207
UC207-20 UCP207-20 UCF207-20 UCFL207-20 UCT207-20 UCFC207-20 UCPA207-20
UC207-21 UCP207-21 UCF207-21 UCFL207-21 UCT207-21 UCFC207-21 UCPA207-21
UC207-22 UCP207-22 UCF207-22 UCFL207-22 UCT207-22 UCFC207-22 UCPA207-22
UC207-23 UCP207-23 UCF207-23 UCFL207-23 UCT207-23 UCFC207-23 UCPA207-23
UC208 UCP208 UCF208 UCFL208 UCT208 UCFC208 UCPA208
UC208-24 UCP208-24 UCF208-24 UCFL208-24 UCT208-24 UCFC208-24 UCPA208-24
UC209 UCP209 UCF209 UCFL209 UCT209 UCFC209 UCPA209
UC209-26 UCP209-26 UCF209-26 UCFL209-26 UCT209-26 UCFC209-26 UCPA209-26
UC209-27 UCP209-27 UCF209-27 UCFL209-27 UCT209-27 UCFC209-27 UCPA209-27
UC209-28 UCP209-28 UCF209-28 UCFL209-28 UCT209-28 UCFC209-28 UCPA209-28
             
UC210 UCP210 UCF210 UCFL210 UCT210 UCFC210 UCPA210
UC210-30 UCP210-30 UCF210-30 UCFL210-30 UCT210-30 UCFC210-30 UCPA210-30
UC210-31 UCP210-31 UCF210-31 UCFL210-31 UCT210-31 UCFC210-31 UCPA210-31
UC210-32 UCP210-32 UCF210-32 UCFL210-32 UCT210-32 UCFC210-32 UCPA210-32
UC211 UCP211 UCF211 UCFL211 UCT211 UCFC211 UCPA211
UC211-32 UCP211-32 UCF211-32 UCFL211-32 UCT211-32 UCFC211-32 UCPA211-32
UC211-34 UCP211-34 UCF211-34 UCFL211-34 UCT211-34 UCFC211-34 UCPA211-34
UC211-35 UCP211-35 UCF211-35 UCFL211-35 UCT211-35 UCFC211-35 UCPA211-35
UC212 UCP212 UCF212 UCFL212 UCT212 UCFC212 UCPA212
UC212-36 UCP212-36 UCF212-36 UCFL212-36 UCT212-36 UCFC212-36 UCPA212-36
UC212-38 UCP212-38 UCF212-38 UCFL212-38 UCT212-38 UCFC212-38 UCPA212-38
UC212-39 UCP212-39 UCF212-39 UCFL212-39 UCT212-39 UCFC212-39 UCPA212-39
UC213 UCP213 UCF213 UCFL213 UCT213 UCFC213  
UC213-40 UCP213-40 UCF213-40 UCFL213-40 UCT213-40 UCFC213-40  
UC214 UCP214 UCF214 UCFL214 UCT214 UCFC214  
UC214-44 UCP214-44 UCF214-44 UCFL214-44 UCT214-44 UCFC214-44  
UC215 UCP215 UCF215 UCFL215 UCT215 UCFC215  
UC215-47 UCP215-47 UCF215-47 UCFL215-47 UCT215-47 UCFC215-47  
UC215-48 UCP215-48 UCF215-48 UCFL215-48 UCT215-48 UCFC215-48  
UC216 UCP216 UCF216 UCFL216 UCT216 UCFC216  
UC217 UCP217 UCF217 UCFL217 UCT217 UCFC217  
UC218 UCP218 UCF218 UCFL218 UCT218 UCFC218  
UC218-56 UCP218-56 UCF218-56 UCFL218-56 UCT218-56 UCFC218-56  
  UCP220 UCF220        
             
UC305 UCP305 SA201 SB201 UK205 NA204 UKP205
UC306 UCP306 SA202 SB202 UK206 NA205 UKP206
UC307 UCP307 SA203 SB203 UK207 NA206 UKP207
UC308 UCP308 SA204 SB204 UK208 NA207 UKP208
UC309 UCP309 SA205 SB205 UK209 NA208 UKP209
UC310 UCP310 SA206 SB206 UK210 NA209 UKP210
UC311 UCP311 SA207 SB207 UK211 NA210 UKP211
UC312 UCP312 SA208 SB208 UK212   UKP212
UC313 UCP313 SA209 SB209 UK213   UKP213
UC314 UCP314 SA210 SB210 UK215   UKP215
UC315 UCP315     UK216   UKP216
UC316 UCP316     UK217   UKP217
UC317       UK218   UKP218
UC318            
UC319            
UC320            

###

Packaging Details 1 piece in a single box
50 boxes in a carton
20 cartons in a pallet
Nearest Port Shanghai or Ningbo
Lead Time For stock parts: 1-5 days.
If no stock parts:
<200 pcs: 15-30 days
200 pcs: to be negotiated.

Advantages and disadvantages of different types of bushings

Bushings are a simple but essential part of machinery with sliding or rotating shaft assemblies. This type of bearing is used in a wide variety of industries because its high load-carrying capacity and excellent anti-friction properties make it a necessity for construction, mining, hydropower, transportation and agricultural machinery. In addition to these applications, bushings also play a vital role in material handling and food processing. This article explores the various types of bushings available.
bushing

air casing

The air bushing forms a frictionless cylinder that applies the load to the rotating object. Bushings are used to measure torque and provide self-centering force in applications where linear motion is critical. The following are load equations that can be used to select the appropriate air sleeve for your application. To learn more about these air sleeves, read on. This article discusses the benefits and uses of air bushings in linear motion.
Bushings have many advantages over bearings. They are not prone to wear and corrosion. Unlike bearings, they can easily bypass conversion and inspection periods. Their high-quality design guarantees reliable machine performance, yet they are inexpensive and easy to replace. In many industries, air compressors are essential for sports. The air bushing eliminates friction, allowing the compressor to work more efficiently. They can also help eliminate the need for frictionless bearings and improve the overall efficiency of the machine.
Another type of air bearing is the cylindrical bushing. These are used for linear and aerostatic motion. Their low friction properties allow them to support radial loads without wearing out or damaging components. They are usually used for normal sized shafts. Air bushings have several components that can be used with other types of air bearings. Cylindrical air bearings have four o-ring grooves that allow them to be inserted into the structure. They are often used with other types of air bearings for smoother motion.

rubber bushing

If you’re looking to buy a new suspension system, you may be wondering if rubber or polyurethane is the right choice. Rubber is less expensive, but not without its drawbacks. Polyurethane is more durable and offers better handling and suspension. Rubber bushings also reduce road feel, while polyurethane isolates the driver from the road. Both materials will help you improve handling and alignment, but each has advantages and disadvantages.
Typically, rubber bushings are cylindrical components with metal inner and outer surfaces. These metals can be stainless steel, mild steel or aluminum. They are usually stress relieved and prestressed for maximum durability. They are designed to meet the exact specifications of a specific application. For example, shock-absorbing rubber bushings are cushioning pads made of polyurethane that absorb road bumps and noise.
Unlike polyurethane, rubber suspension bushings have a shorter lifespan than polyurethane. This is because rubber is more susceptible to damage from UV rays, road chemicals and oils. The rubber also stretches and warps due to the pressure of the road. The rubber bushing also squeaks, which can be cause for concern. But if the noise persists for a long time, it may be a sign that your vehicle needs a new suspension system.
The main reason why cars use rubber bushings is for shock absorption. During machine use, vibration and noise caused by the movement of parts can cause serious damage. To prevent this, rubber bushings act as shock absorbers and damping agents. Rubber bushings are an excellent choice for automakers, but they are also used in a variety of industrial settings.
bushing

Polyurethane bushing

If you want to make your vehicle handle better, polyurethane bushings may be the answer. They come in different shapes and sizes and can improve a wide range of areas. This article will explore the advantages and disadvantages of polyurethane bushings and their potential place in your car. However, before you decide to upgrade your suspension, you should understand the various advantages and disadvantages of polyurethane bushings.
The main difference between a polyurethane bushing and a rubber bushing is how the bushing rides on the suspension arm. Polyurethane bushings do not have faces that slide against each other like rubber bushings. This means they allow for more rotation and flexion, as well as consistent alignment of the control arms. Polyurethane bushings require lubrication, but only need to be lubricated every five years, much longer than equivalent rubber bushings.
Another difference between polyurethane and rubber bushings is hardness. The former has the least elasticity and is generally the most suitable for street use. While rubber bushings provide the best NVH quality, they are also notorious for changing suspension geometry. Rubber is known to be an excellent choice for street use, but polyurethane has a lifespan that far outlasts rubber.

bronze bushing

There are two main types of bronze bushings, sintered and cast. The latter require additional lubrication and are typically used in applications where powder metal products cannot be secured. The former is cheaper than the latter, but the process is more expensive. Bronze bushings can be used in environments where the material will be exposed to high temperature and vibration. For these reasons, the production process is relatively slow and expensive.
The strength of bronze is the main reason why they are so popular. Brass is a softer metal that deforms and corrodes easily. The bronze casing can withstand continuous immersion in water and can last for hundreds of years with little or no maintenance. However, it is important to note that this metal is not resistant to aggressive chemicals and requires regular maintenance to keep it in good condition.
Bronze bushings offer many advantages, including durability and aesthetics. Bronze bushings are available in a variety of sizes and can be ordered in imperial and metric sizes. They can be built to your specifications and are very durable. You can even custom order them if you want. And because they can be customized, they are an excellent choice for high-end applications. The quality of the bronze bushings is second to none.

Plastic bushing

Engineered composite plastic bushings have been shown to last longer than bronze bushings and have also been found to reduce maintenance costs by up to 40%. Plastic bushings have become the first choice for thousands of applications, including medical equipment, food processing machinery, pumps, and more. Bronze bushings are oil-impregnated, but their performance is limited by their inherent weaknesses: oil-impregnated bronze tends to develop high levels of capillary action and requires rotational motion to maintain an intact oil film. Low speed and intermittent use of bronze bushings can also hinder the ability of the lubricant to provide adequate lubrication.
Advantages of plastic bushings over metal include low friction, non-reactive surfaces, and long life. CZPT offers a variety of engineering plastics that outperform traditional metals in a range of applications. For example, nylon bushings resist wear while requiring little lubrication. In addition, polymer-shaped plastics are lightweight and highly resistant to aggressive cleaning agents and chemicals.
Besides being less expensive than metal bushings, plastic bushings offer many other advantages. They are very durable, have a low coefficient of friction, and are more wear-resistant than metal. Unlike metal, plastic bushings do not require lubrication and do not absorb dust and oil like metal bushings. They are lightweight, easy to maintain and last longer. This makes them an excellent choice for many applications.
bushing

Sleeve bearing

Sleeve bearings are simple pipes with matching components. They facilitate linear motion by absorbing friction and vibration. They can withstand heavy loads and work at high temperatures for long periods of time. Flange bearings are similar to sleeve bearings, but are enclosed and rotated in a housing unit. Sleeve bearings have higher load-carrying capacity and resistance to shock loads. Furthermore, they are lightweight and low cost.
Another name for sleeve bearings is babbitt radial bearings. These bearings are usually made of bronze and have straight inner and outer diameters. They are also impregnated with oil and can withstand radial loads. Typical uses for sleeve bearings are agriculture, automotive and machine tools. Sleeves can also be solid or cored material, depending on the intended use.
The type of sleeve bearing used in the bushing is important in determining which type of bushing to buy. Sleeve bearings are sized based on pressure and speed considerations. Typically, the PV limit is an upper bound on the combined pressure and velocity for a given casing material. In some cases, the sleeve bearing used in the bushing is the same as the plain bearing.
Sleeve bearings are simple in design and made from a variety of materials, including bronze and plastic. They are more affordable than metal, but plastic is still not inaudible. Plastic sleeve bearings will rattle like metal bearings if the gap between the two bushings is not accurate. Additionally, high temperature electronic painting can permanently thin the casing. The stainless steel backing provides a good surface for electronic painting and enhances abrasion resistance.

China Ucf Pillow Block Bearing for Agricultural Machinery Bearings     drive shaft bearingChina Ucf Pillow Block Bearing for Agricultural Machinery Bearings     drive shaft bearing
editor by czh 2023-01-12

China Gyratory Crusher Bronze Spare Parts Main Shaft Step Step Bearing bearing engineering

Item Description

Product Description
Hyton (ZheJiang ) provide the a single-quit provider for practically all the spare and use areas ,mainly contain : Principal Body , Adjustment Ring Head Assy ,Bowl ,Travel Equipment ,Counterweight assy ,Shaft ,Pitman ,Bronze Bushing ,Pump ,Tramp Launch Cylinder ,Protection Bushing ,Bearing ,Seals ,Spring ,Wedge ,Toggle Plate ,and And so forth .

Cone Crusher Suitable Model Below Underneath

Solitary Cylinder
GP:  GP100 GP200 GP300 GP500 GP11F GP220 GP550 GP100S GP200S GP300S GP500S
Svedala: CH420 CH430 CH440 CH660 CH870 CH880 CS420 CS430 CS440 CS660

Multi-cylinder
HP:HP100 HP200 HP300 HP400 HP500 HP700 HP800 HP4 HP5 HP6
Terex: C-1540 C-1540R C-1545 C-1545P C-1550 C-1550P C-1554
Telsmith: T300 T400 T500 T900
Trio : TP260 TP350 TP450 TP600 TP900

Main Features : 

Organization Profile:


 
Hyton’s Ensure to all of our buyers :   

one.All of the castings finish should go along with the Metal Inspection and Dimension Inspection .

two.CZPT will usually have the accountability of all the products from CZPT in the market , will support a “24+3″services rules (Soon after get the request  from client , The soon after provider office of CZPT myst offer the suggestions solution within 24 several hours ,and must get Steady scheme CZPT resolve the promblem in 3 times .

three.CZPT have a specialist after-provider team can guarantee service all more than the planet ,support including the Installation Xihu (West Lake) Dis. ,Measurement at internet site  ,Inspection and etc .

Packing and Delivery:

After goods packaged effectively , we need to have only 1 day ship great to ZheJiang port ,which implies that most of the spare components you bought from CZPT ,it will get your port inside of 30 days all about the globe if ship by sea.
 
Our Benefits
1)Your inquiry connected to our merchandise & price will be rapidly.
two) Well qualified & experienced personnel are to reply all your inquiries in English of course.
3) Your business romantic relationship with us will be private to any third social gathering.
four) One stop purchase services: substantial rang of items for certified providing.
five) We reaction to client’s inquiry inside of 12 several hours.

FAQ:

1.Q: Are you a foundry or trading firm?
A: Our manufacturing unit considering that 2004,  We equip with complete facilities, all manufacturing method from manufacturing to testing is finished in our own factory.

two.Q:What sort of merchandise do you make?
A: We focus in mining equipment spare and wear elements, widely fit for Jaw Crusher,Cone Crusher,VSI crusher,Effect Crusher…

3.Q:What kind of material do you supply?
A:Large manganese steel, substantial chrome iron, alloy steel are at the moment the most regular content of us.

four.Q:What is your time of shipping?
A:Our guide time is typically 1~2 weeks for spare areas,3~4 weeks days for put on areas.

five.Q:Do you offer you the supporting support for engineering and engineering ?
A: Sure. our engineering group can measure products at mining internet site, they also can make more realistic design and style for the crusher parts.

 

six.Q:How to check your quanlity?
A:We will present you materials inspection and measurement inspection right after fininsh the products,at the identical time,we will give you the existence time ensure letter right after shipping the merchandise. The very best suggestion to all the client who could desire our solution-Take a look at 2 established very first,all the good business connection all from examination and trust

US $600-800
/ Piece
|
1 Piece

(Min. Order)

###

After-sales Service: 6 Months
Warranty: 6 Months
Certification: CE, RoHS, ISO 9001:2000, ISO 9001:2008
Standard: ASTM
Surface Treatment: Polishing
Manufacturing Process: Casting

###

Samples:
US$ 150/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
US $600-800
/ Piece
|
1 Piece

(Min. Order)

###

After-sales Service: 6 Months
Warranty: 6 Months
Certification: CE, RoHS, ISO 9001:2000, ISO 9001:2008
Standard: ASTM
Surface Treatment: Polishing
Manufacturing Process: Casting

###

Samples:
US$ 150/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

Types of Ball Bearings

Modern ball bearing configurations have different materials and geometries to meet the demands of different working environments and applications. There are different types of ball bearings: single row deep groove, double-row deep groove, angular contact ball bearing, thrust, and self-aligning. Let us look at the differences between each type and learn why they are important for various purposes. Listed below are some of the most common types of ball bearings.

Miniature bearings

Although miniature ball bearings are a popular choice for small mechanical components, they are not without their challenges. They must be properly lubricated and stored in clean rooms. A strand of hair could ruin a miniature bearing. Fortunately, manufacturers offer lubrication services and a “Clean Room” for customers to store their miniature bearings safely. Read on to learn more about these small bearings and how they can help you.
The size of a miniature ball bearing can vary significantly, but most types of these devices are available in sizes ranging from.040 inch to one eighth of an inch. Whether you need a small ball bearing for a miniature car or a tiny instrument, a miniature bearing can save space while still offering high performance. Many of these bearings are shielded to prevent dirt from entering and leakage of lubricant. They can be flanged or unflanged, and some miniature ball bearings have extended inner rings that are designed for easy plate mounting.
Miniature ball bearings are commonly made from stainless steel or chrome steel. Both metals have their advantages. Stainless steel is the most popular material for ball bearings, which allows for a high load capacity while being quiet. Because stainless steel is relatively inexpensive, many small instrument bearings are made entirely of stainless steel. The difference in price is minimal, as the amount of steel is relatively small. Stainless steel miniature bearings are the smallest and lightest of all types of miniature ball bearings.

Self-aligning ball bearings

bearing
In the simplest terms, self-aligning ball bearings are ball bearings with flex shafts. If you’re looking for a ball bearing with a high degree of precision, you’ll want to choose one with a flex shaft, which means it can adjust to the proper orientation of the bearing’s flex shaft. Ball bearings with flex shafts are also recommended. But, what are these bearings?
Self-aligning ball bearings are made with two rows of balls and a common sphered raceway on the outer ring. As a result, they can accommodate small errors in shaft alignment and mounting. The CZPT brand is especially suitable for high-speed applications requiring greater running accuracy. The self-alignment mechanism is enabled by the fact that the balls are placed in two rows on either side of the sphered raceway in the outer ring. These two rows of balls also promote reduced friction and wear.
Another type of self-aligning ball bearings is a double-row design. They feature a common sphered raceway on the outer ring, a hollow spherical ring, and a cage that rotates relative to it. A self-aligning ball bearing is used in applications where shaft misalignment is a problem, such as conveying equipment. They are also used in simple woodworking machinery and ventilators.

Ceramic ball bearings

Ceramic ball bearings have several advantages over steel or metal bearings. These include increased acceleration capability, reduced friction, improved wear-resistance, and higher speeds. The United States holds the leading position in the global ceramic ball bearings market thanks to a rebounding motor vehicle production and healthy fixed investment environment. In the United States, there are three primary markets for ceramic ball bearings: healthcare, automotive, and aerospace. Here are the main benefits of ceramic ball bearings:
Hybrid ball bearings are also available. Hybrid bearings feature traditional metal rings and silicon nitride (ceramic) balls. Hybrid bearings offer important performance advantages over all-steel bearings, and they are more affordable. However, full ceramic ball bearings have all ceramic parts, and are best suited for machines that require high precision. These types of bearings also resist corrosion and wear.
Compared to steel ball bearings, ceramic balls are lighter than steel. They are also less dense, which means less friction and therefore less heat. Additionally, ceramic balls operate at higher speeds than steel balls, which increases their durability and longevity. But they are still not as strong as steel bearings. And because of their reduced density, they are much cheaper to manufacture. Therefore, they are an excellent choice for many applications. You can expect them to last much longer than steel bearings.

Steel carbon ball bearings

High precision G25 ball bearings are made of the highest grade chrome steel and hot forged from bar stock. Statistical process control and exacting atmospheres help ensure uniform hardness and microstructure. Moreover, these bearings are of the highest quality, with fine surface finish and a tight tolerance. This makes them the most widely used and reliable choice for industrial and automotive applications. However, there are some considerations that should be taken into account before acquiring a steel carbon ball bearing.
Generally, AFBMA grade 200 is the standard hardness specification for this material. AFBMA grade 100 can also be obtained with great difficulty. Despite the high hardness of steel carbon ball bearings, their outer surface is just a thin hardened shell, so a special micro hardness test is needed to evaluate them. In addition to the hardness, steel balls are easily machined and ground. Some manufacturers even offer stainless steel ball bearings and ball sets.
Another factor that makes steel carbon ball bearings so valuable is their precision. They can give precise measurements, which makes them ideal for low and medium-speed applications. Due to their high precision and durability, steel carbon ball bearings can be used in many applications, from conveyor machines to roller skates. However, you should be aware that the material used to produce these bearings is not suitable for applications in which they are exposed to water and gases. Further, they are also noisy and heavy, and must be installed properly in a manufacturing environment.

Stainless steel ball bearings

bearing
Stainless steel ball bearings are made from a high-quality type of stainless steel, 440C, which offers optimal corrosion and abrasion resistance. These bearings are also durable and rust-free, and are suitable for a variety of applications. Among others, stainless steel ball bearings are used in beverage and food processing plants, pharmaceuticals, pulp and paper mills, marine environments, and freezers.
Stainless steel bearings are available in various grades. For example, AISI 440C offers corrosion resistance, while the DD400 is specifically designed for marine applications. Both types of stainless steel are available in different forms, including open, shielded, and sealed. Stainless steel ball bearings can also be custom-made, as BL is known for producing customized bearings. There are also other materials that are available.
AISI type 316 stainless steel balls are ideal for marine applications and food processing. They have excellent resistance to most organic materials and are also used in medical devices and dispenser pumps. They are also strong enough to resist many petroleum products and are widely used in medical equipment and cosmetic applications. In addition, stainless steel balls can be plated to provide an additional layer of protection against chemicals. To understand how they differ, let’s take a look at some common types of stainless steel ball bearings.

Stainless steel

Stainless steel ball bearings can be used in various applications. Besides being corrosion resistant, they also last longer thanks to the Molded-Oil lubrication technology. Stainless steel ball bearings are clean units, which saves time and money in terms of maintenance, replacement, and downtime. But what are the advantages of stainless steel ball bearings? Let us discuss these benefits. Also, we’ll discuss their advantages and disadvantages.
Stainless steel ball bearings offer notable advantages, including corrosion resistance, increased strength, and improved stability under high temperatures. These qualities make them the ideal choice for special circumstances and demanding environments. However, you should be careful when choosing stainless steel bearings. There are several different types of stainless steel. Here’s a brief look at what makes them the best choice. And remember: Stainless steels are also recyclable. In fact, they can be recycled indefinitely.
They’re made from chrome alloy electric furnace steel, which is hardened for optimum service life and strength. They have the highest surface finish and dimensional accuracy. Advanced heat-treating processes increase their strength and anti-cracking abilities. And thanks to their unique materials, they’re corrosion-resistant. As a result, they’re more durable than other types of bearings. And since they’re made with a high-quality steel, you’ll save money in the long run.

Plastic ball bearings

bearing
Plastic ball bearings were developed to meet the specific needs of applications where standard steel bearings would fail. Steel and 440C stainless steel are both susceptible to rusting when exposed to water, making them poor choices for applications involving food processing, swimming pools, and medical equipment. In addition to this, the plastic material is able to dampen vibrations and make the bearing virtually silent. Here’s what makes plastic ball bearings so great for these applications.
Plastic ball bearings are lightweight, corrosion-resistant, and offer a long service life. In addition to their low price, they can be easily cleaned and are incredibly durable. Motion plastics specialist igus has recently expanded its range of xiros polymer grooved ball bearings. These bearings are also FDA-compliant, lubricant-free, electrically insulating, and resistant to both temperature and media.
Plastic bearings are often mounted into other components like wheels, pulleys, and housings. In this way, the inner ring is essentially a profile of the pulley’s profile, and the outer ring is a shaft or fixing clip. The result is seamless integration of the bearing and the surrounding parts, which reduces the overall assembly time and costs. You can also use multiple plastic ball bearings in one application for more options.

China Gyratory Crusher Bronze Spare Parts Main Shaft Step Step Bearing     bearing engineeringChina Gyratory Crusher Bronze Spare Parts Main Shaft Step Step Bearing     bearing engineering
editor by czh 2023-01-01

China Motorcycle/Machine/Auto Parts/Agricultural NSK/Koyo/Timken/Snr/NTN/NACHI Roller Bearing/Wheel Bearing/Auto Bearing/Ball Bearing drive shaft bearing

Merchandise Description

Name: SKF/NSK/KOYO/TIMKEN/SNR/NTN/NACHI roller bearing/ball bearing/wheel bearing/vehicle bearing/hub bearing
Sort: ball bearing/roller bearing/wheel bearing/vehicle bearing
Situation: Motor, Gearbox, Automobiles
Weight: – KG
Requirements: – mm
Material: Chrome steel/GCR-15
Technologies: Hot forging
CAGE: Metal
SEAL: Open/2RS/ZZ
Rolling body: Steel ball
Abs: With out
Top quality: Top grade
Brands: DHXB, OEM
Origin: China
Pictures were taken in kind, if you want more details please contact us, we provide quality products with competitive advantages for you!

Relevant Catalogues You Could Worry

Bearing Designation Boundary Dimensions Basic Load 
Score(kN)
Limit Speed Mass
(mm)
Sheild Sealed d D B Cr Cor Grease Oil (kg)
(min.) Approx
6000 ZZ 6000 2RS ten 26 8 .three 4.fifty five one.95 19000 36000 .019
6001 ZZ 6001 2RS twelve 28 8 .3 five.one two.4 17000 32000 .571
6002 ZZ 6002 2RS 15 32 9 .3 5.6 2.eighty five 14000 27000 .03
6003 ZZ 6003 2RS seventeen 35 ten .3 6 three.twenty five 12000 25000 .039
6004 ZZ 6004 2RS 20 42 twelve .6 9.4 5.05 10000 21000 .069
6005 ZZ 6005 2RS twenty five forty seven twelve .six 10.one 5.eighty five 9000 18000 .08
6006 ZZ 6006 2RS thirty fifty five 13 one 13.two 8.25 7500 15000 .116
6007 ZZ 6007 2RS 35 62 14 one 15.9 10.three 6500 13000 .155
6008 ZZ 6008 2RS 40 sixty eight 15 1 16.7 11.5 5800 12000 .192
6009 ZZ 6009 2RS forty five seventy five 16 one 21 15.1 5300 11000 .245
6571 ZZ 6571 2RS fifty eighty 16 one 21.eight 16.six 4800 9900 .261
6011 ZZ 6011 2RS 55 ninety 18 one.1 28.3 21.2 4300 8900 .385
6012 ZZ 6012 2RS sixty 95 18 1.1 29.4 23.two 4000 8400 .415
6013 ZZ 6013 2RS 65 100 eighteen one.one 30.5 twenty five.two 3700 7800 .435
6014 ZZ 6014 2RS 70 110 20 1.1 38.1 thirty.nine 3500 7200 .602
6015 ZZ 6015 2RS 75 a hundred and fifteen 20 one.one 39.six 33.five 3300 6800 .638
6016 ZZ 6016 2RS 80 a hundred twenty five 22 one.one forty seven.six 39.8 3100 6300 .85
6017 ZZ 6017 2RS 85 one hundred thirty 22 one.1 forty nine.five 43.1 2900 5900 .89
6018 ZZ 6018 2RS 90 one hundred forty 24 1.5 fifty eight.2 forty nine.seven 2700 5600 1.sixteen
6019 ZZ 6019 2RS 95 145 24 one.5 sixty.four fifty three.9 2500 5200 1.21
6571 ZZ 6571 2RS one hundred 150 24 one.5 sixty.two fifty four.two 2500 5100 one.twenty five
6571 ZZ 6571 2RS one zero five 160 26 2 seventy two.three sixty five.8 2300 4700 1.59
sixty/22 ZZ 60/22 2RS 22 44 12 .6 9.4 5.15 9900 20000 .073
6571 ZZ 6571 2RS a hundred and ten a hundred and seventy 28 2 82 73 2200 4500 one.96
6571 ZZ 6571 2RS one hundred twenty 180 28 two 85 seventy nine.3 2100 4200 two.07
6026 ZZ 6026 2RS one hundred thirty 200 33 two 106 one hundred and one 1900 3800 three.sixteen
sixty/28 ZZ sixty/28 2RS 28 52 12 .six 12.four 7.4 8100 16000 .097
6571 ZZ 6571 2RS one hundred forty 210 33 two 110 109 1800 3600 three.fifty five
sixty/32 ZZ sixty/32 2RS 32 fifty eight 13 one fifteen nine.15 7200 14000 .127
6200 ZZ 6200 2RS 10 thirty 9 .six 5.1 2.four 16000 29000 .032
6201 ZZ 6201 2RS 12 32 10 .six six.8 three.05 15000 27000 .037
6202 ZZ 6202 2RS 15 35 eleven .6 seven.65 3.seventy five 13000 24000 .045
6203 ZZ 6203 2RS 17 40 12 .6 nine.fifty five four.8 12000 21000 .065
6204 ZZ 6204 2RS 20 47 fourteen 1 twelve.eight six.65 9700 17000 .106
6205 ZZ 6205 2RS twenty five fifty two fifteen one fourteen 7.85 8400 15000 .128
6206 ZZ 6206 2RS thirty 62 sixteen one 19.5 eleven.three 7000 13000 .199
6207 ZZ 6207 2RS 35 72 seventeen one.one twenty five.seven 15.four 6000 11000 .288
6208 ZZ 6208 2RS forty eighty 18 one.1 29.1 17.8 5400 10000 .366
6209 ZZ 6209 2RS 45 85 19 1.one 32.7 twenty.3 5100 9200 .407
6210 ZZ 6210 2RS fifty 90 twenty 1.1 35.1 23.three 4600 8500 .463
6211 ZZ 6211 2RS 55 a hundred 21 1.5 43.4 29.four 4100 7600 .607
6212 ZZ 6212 2RS 60 a hundred and ten 22 1.5 fifty two.4 36.two 3700 6900 .783
6213 ZZ 6213 2RS 65 a hundred and twenty 23 1.five fifty seven.2 forty.one 3500 6400 .99
6214 ZZ 6214 2RS 70 125 24 one.5 sixty two.2 forty four.1 3300 6100 1.07
6215 ZZ 6215 2RS seventy five 130 25 1.five sixty seven.4 forty eight.three 3100 5800 1.eighteen
6216 ZZ 6216 2RS eighty one hundred forty 26 2 seventy two.seven fifty three 2900 5400 one.four
6217 ZZ 6217 2RS eighty five 150 28 two 84 61.nine 2700 5000 one.79
6218 ZZ 6218 2RS 90 160 thirty two 96.one 71.5 2600 4700 2.15
6219 ZZ 6219 2RS ninety five 170 32 two.one 109 81.9 2400 4400 2.sixty two
6220 ZZ 6220 2RS 100 180 34 2.one 122 ninety three.1 2300 4200 three.fourteen
6221 ZZ 6221 2RS a hundred and five a hundred ninety 36 2.one 133 a hundred and five 2200 3900 three.7
62/22 ZZ sixty two/22 2RS 22 50 14 one 12.8 six.sixty five 9700 17000 .118
6222 ZZ 6222 2RS 110 two hundred 38 2.1 one hundred forty four 117 2000 3700 4.36
6224 ZZ 6224 2RS one hundred twenty 215 forty two.1 one hundred fifty five 131 1900 3400 five.15
6226 ZZ 6226 2RS 130 230 forty 3 167 146 1800 3200 5.82
sixty two/28 ZZ sixty two/28 2RS 28 fifty eight 16 1 17.9 9.75 7600 14000 .173
6228 ZZ 6228 2RS 140 250 42 three 166 one hundred fifty 1600 2900 seven.forty five
sixty two/32 ZZ 62/32 2RS 32 sixty five 17 one 23.5 thirteen.1 6900 12000 .228
6300 ZZ 6300 2RS ten 35 eleven .6 8.1 3.45 16000 27000 .053
6301 ZZ 6301 2RS twelve 37 twelve 1 9.7 four.two 15000 25000 .06
6302 ZZ 6302 2RS 15 42 thirteen one eleven.four five.forty five 12000 20000 .082
6303 ZZ 6303 2RS seventeen 47 fourteen 1 thirteen.6 6.sixty five 10000 18000 .one hundred fifteen
6304 ZZ 6304 2RS twenty fifty two 15 one.1 15.nine 7.85 9500 17000 .144
6305 ZZ 6305 2RS 25 62 17 1.1 20.6 11.3 7500 13000 .232
6306 ZZ 6306 2RS 30 72 19 1.one 26.seven fifteen 6400 12000 .346
6307 ZZ 6307 2RS 35 eighty 21 one.five 33.four 19.three 5700 ten thousand .457
6308 ZZ 6308 2RS forty ninety 23 one.five 40.seven 24 5100 9200 .633
6309 ZZ 6309 2RS forty five one hundred twenty five one.five 48.9 29.five 4500 8100 .833
6310 ZZ 6310 2RS 50 a hundred and ten 27 two sixty two 38.three 4100 7300 1.07
6311 ZZ 6311 2RS 55 a hundred and twenty 29 two seventy one.6 forty five 3700 6700 one.37
6312 ZZ 6312 2RS sixty one hundred thirty 31 two.1 eighty one.nine 52.two 3500 6200 one.7
6313 ZZ 6313 2RS 65 one hundred forty 33 two.1 ninety two.7 fifty nine.9 3200 5800 two.08
6314 ZZ 6314 2RS 70 150 35 2.one 104 68.two 3000 5400 2.52
6315 ZZ 6315 2RS seventy five a hundred and sixty 37 two.1 113 seventy seven.2 2800 5000 3.02
6316 ZZ 6316 2RS 80 a hundred and seventy 39 two.1 123 86.7 2700 4700 3.59
6317 ZZ 6317 2RS 85 180 forty one 3 133 96.eight 2500 4400 4.23
6318 ZZ 6318 2RS 90 a hundred ninety forty three 3 143 107 2400 4200 4.91
6319 ZZ 6319 2RS ninety five two hundred 45 three 153 119 2200 4000 5.sixty seven
6320 ZZ 6320 2RS a hundred 215 forty seven 3 173 141 2100 3600 seven
6321 ZZ 6321 2RS one hundred and five 225 49 3 184 153 2000 3500 eight.05
sixty three/22 ZZ 63/22 2RS 22 56 sixteen one.one 18.5 nine.4 8600 15000 .201
6322 ZZ 6322 2RS a hundred and ten 240 50 three 205 a hundred and eighty 1900 3200 9.fifty four
6324 ZZ 6324 2RS 120 260 55 three 207 185 3000 12.5
6326 ZZ 6326 2RS 130 280 fifty eight four 229 214 2700 15.one
sixty three/28 ZZ sixty three/28 2RS 28 68 eighteen 1.one 23.five 13.1 6900 12000 .328
6328 ZZ 6328 2RS a hundred and forty three hundred 62 4 253 246 2500 19.four
63/32 ZZ 63/32 2RS 32 seventy five twenty 1.1 30.one 16.two 6400 11000 .437
6800 ZZ 6800 2RS ten 19 5 .three one.seven .eighty four 22000 43000 .005
6801 ZZ 6801 2RS 12 21 five .3 one.nine one.05 20000 39000 .006
6802 ZZ 6802 2RS 15 24 five .3 two.one one.25 16000 33000 .007
6803 ZZ 6803 2RS 17 26 5 .three two.six 1.55 30000 .008
6804 ZZ 6804 2RS 20 32 7 .three 4 two.45 25000 .018
6805 ZZ 6805 2RS twenty five 37 seven .3 four.3 2.ninety five 10000 21000 .571
6806 ZZ 6806 2RS 30 forty two 7 .3 4.fifty five 3.4 18000 .026
6807 ZZ 6807 2RS 35 forty seven seven .3 4.75 3.eighty five 16000 .03
6808 ZZ 6808 2RS 40 fifty two seven .3 four.95 four.2 6700 14000 .033
6809 ZZ 6809 2RS forty five 58 7 .3 six.two five.four 13000 .04
6810 ZZ 6810 2RS fifty 65 seven .three six.six 6.one 11000 .052
6811 ZZ 6811 2RS fifty five seventy two nine .3 8.eight 8.1 10000 .083
6812 ZZ 6812 2RS sixty 78 ten .3 eleven.five 10.six 9400 .104
6813 ZZ 6813 2RS 65 eighty five 10 .six 11.9 eleven.5 8600 .126
6814 ZZ 6814 2RS 70 90 10 .six 12.1 11.nine 8100 .134
6815 ZZ 6815 2RS seventy five 95 10 .6 twelve.five 12.9 7600 .142
6816 ZZ 6816 2RS 80 one hundred ten .six twelve.seven thirteen.three 7200 .fifteen
6817 ZZ 6817 2RS 85 110 13 one eighteen.seven 19 6600 .266
6818 ZZ 6818 2RS 90 115 thirteen 1 19 19.7 6300 .279
6820 ZZ 6820 2RS 100 a hundred twenty five thirteen 1 19.six 21.2 5700 .309
6822 ZZ 6822 2RS 110 140 sixteen one 28.one thirty.seven 5100 .606
6824 ZZ 6824 2RS a hundred and twenty 150 sixteen one 29 33 4700 .655
6826 ZZ 6826 2RS a hundred thirty a hundred sixty five 18 one.1 36.nine 41.two 4300 .939
6828 ZZ 6828 2RS a hundred and forty one hundred seventy five eighteen 1.one 38.two 44.four 4000 one
6900 ZZ 6900 2RS ten 22 six .3 two.7 1.25 21000 41000 .01
6901 ZZ 6901 2RS twelve 24 six .three two.nine 1.forty five 18000 36000 .011
6902 ZZ 6902 2RS fifteen 28 7 .three four.three two.25 15000 30000 .017
6903 ZZ 6903 2RS 17 thirty seven .3 4.six two.55 13000 28000 .018
6904 ZZ 6904 2RS twenty 37 nine .3 6.35 3.seven 11000 23000 .036
6905 ZZ 6905 2RS 25 42 nine .3 seven four.fifty five 9300 19000 .041
6906 ZZ 6906 2RS 30 47 9 .3 seven.twenty five 5 8200 17000 .045
6907 ZZ 6907 2RS 35 55 10 .six 10.nine 7.seventy five 6800 14000 .073
6908 ZZ 6908 2RS forty sixty two 12 .six 13.7 nine.95 6100 13000 .112
6909 ZZ 6909 2RS forty five 68 twelve .six 14.1 ten.9 5500 11000 .132
6910 ZZ 6910 2RS fifty 72 12 .6 14.five 11.7 11000 .133
6911 ZZ 6911 2RS 55 80 thirteen 1 16.six 14.one 4500 9600 .185
6912 ZZ 6912 2RS sixty 85 13 1 twenty.two 17.3 8900 .192
6913 ZZ 6913 2RS sixty five 90 thirteen 1 seventeen.four sixteen.one 3900 8400 .211
6914 ZZ 6914 2RS 70 100 16 one 23.seven 21.2 3600 7600 .342
6915 ZZ 6915 2RS 75 one zero five sixteen 1 24.4 22.six 7200 .363
6916 ZZ 6916 2RS 80 110 sixteen one 25 24 3200 6800 .382
6918 ZZ 6918 2RS ninety one hundred twenty five 18 1.1 32.8 31.six 2800 6000 .565
6919 ZZ 6919 2RS ninety five one hundred thirty 18 one.1 33.7 33.5 2700 5700 .705
6920-1 ZZ 6920-1 2RS 100 140 twenty one.one 45 41.9 5300 .96
6921-1 ZZ 6921-1 2RS one zero five 145 twenty one.1 46.5 44.8 2400 5100 1
6922 ZZ 6922 2RS 110 150 twenty one.one 47.9 forty seven.8 4900 1.04
6924 ZZ 6924 2RS one hundred twenty a hundred sixty five 22 1.one fifty seven.two fifty six.9 4400 1.forty one
6926-1 ZZ 6926-1 2RS a hundred thirty 180 24 1.5 sixty nine.6 70 4100 one.86
6928-1 ZZ 6928-1 2RS a hundred and forty one hundred ninety 24 one.5 71.three 74.eight 3800 1.98

ZheJiang Huaxu Bearing Co.,Ltd 
Our factory specialize wheel hub bearing, wheel bearing kit, clutch bearing, taper roller bearing, truck bearing, wheel hub bearing in higher quality.
Our bearings have huge loading capacity and extended life span, and commonly in shape in diverse autos.
wheel bearings and kits to autos like LADA, TOYOTA, HONDA,  AUDI,Chevrolet, HYUNDAI,FIAT, FORD and so on.
Truck bearings applied to VOLVO, Man, BENZ, DAF, SAF and so on.
And we can create bearings which can fulfill your multifarious calls for.
For instance, wheel bearing, taper roller bearing, clutch release bearing, ball bearing, truck bearing ect. 
We can provide brands likeSKF, TIMKEN, NSK, KOYO, NTN,  NACHI, GMB, BW, GM, HYUNDAI ect.

Q:What’s your soon after-income services and warranty?
A: We assure to bear the following obligations when faulty merchandise were discovered:
one.12 months guarantee from the very first day of obtaining products
2. Replacements would be despatched with items of your up coming get
3. Refund for defective items if buyers call for.

Q:Do you acknowledge ODM&OEM orders?
A: Indeed, we give ODM&OEM services to throughout the world consumers, we also personalize OEM box and packing as your specifications.

Q:What is the MOQ?
A: MOQ is 10pcs for standardized goods for customized goods, MOQ must be negotiated in progress. There is no MOQ for sample orders.

Q:How lengthy is the guide time?
A: The lead time for sample orders is 3-5 times, for bulk orders is 5-fifteen days.

Q:Do you supply free samples? 
A: Indeed we offer you totally free samples to distributors and wholesalers, however clients ought to bear freight. We DO NOT provide free samples to stop users. 

Q:How to area purchase?
A: 1. Email us the design, model and amount,shipping way of bearings and we will estimate our very best price for you 
2. Proforma Bill made and despatched to you as the value agreed by equally parts 
three. Deposit Payment following confirming the PI and we organize production 
4. Harmony paid just before shipment or following copy of Bill of Loading.

US $0.1-3.5
/ Set
|
1 Set

(Min. Order)

###

Contact Angle: 15°
Aligning: Non-Aligning Bearing
Separated: Separated
Rows Number: Single
Load Direction: Radial Bearing
Material: Chrome Steel/Gcr-15

###

Samples:
US$ 0/Set
1 Set(Min.Order)

|
Request Sample

###

Customization:

###

Name: SKF/NSK/KOYO/TIMKEN/SNR/NTN/NACHI roller bearing/ball bearing/wheel bearing/auto bearing/hub bearing
Type: ball bearing/roller bearing/wheel bearing/auto bearing
Position: Motor, Gearbox, Automobiles
Weight: – KG
Specifications: – mm
Material: Chrome steel/GCR-15
Technology: Hot forging
CAGE: Metal
SEAL: Open/2RS/ZZ
Rolling body: Steel ball
ABS: Without
Quality: Top grade
Brands: DHXB, OEM
Origin: China
Pictures were taken in kind, if you want more details please contact us, we provide quality products with competitive advantages for you!

###

Bearing Designation Boundary Dimensions Basic Load 
Rating(kN)
Limit Speed Mass
(mm)
Sheild Sealed d D B Cr Cor Grease Oil (kg)
(min.) Approx
6000 ZZ 6000 2RS 10 26 8 0.3 4.55 1.95 19000 36000 0.019
6001 ZZ 6001 2RS 12 28 8 0.3 5.1 2.4 17000 32000 0.022
6002 ZZ 6002 2RS 15 32 9 0.3 5.6 2.85 14000 27000 0.03
6003 ZZ 6003 2RS 17 35 10 0.3 6 3.25 12000 25000 0.039
6004 ZZ 6004 2RS 20 42 12 0.6 9.4 5.05 10000 21000 0.069
6005 ZZ 6005 2RS 25 47 12 0.6 10.1 5.85 9000 18000 0.08
6006 ZZ 6006 2RS 30 55 13 1 13.2 8.25 7500 15000 0.116
6007 ZZ 6007 2RS 35 62 14 1 15.9 10.3 6500 13000 0.155
6008 ZZ 6008 2RS 40 68 15 1 16.7 11.5 5800 12000 0.192
6009 ZZ 6009 2RS 45 75 16 1 21 15.1 5300 11000 0.245
6010 ZZ 6010 2RS 50 80 16 1 21.8 16.6 4800 9900 0.261
6011 ZZ 6011 2RS 55 90 18 1.1 28.3 21.2 4300 8900 0.385
6012 ZZ 6012 2RS 60 95 18 1.1 29.4 23.2 4000 8400 0.415
6013 ZZ 6013 2RS 65 100 18 1.1 30.5 25.2 3700 7800 0.435
6014 ZZ 6014 2RS 70 110 20 1.1 38.1 30.9 3500 7200 0.602
6015 ZZ 6015 2RS 75 115 20 1.1 39.6 33.5 3300 6800 0.638
6016 ZZ 6016 2RS 80 125 22 1.1 47.6 39.8 3100 6300 0.85
6017 ZZ 6017 2RS 85 130 22 1.1 49.5 43.1 2900 5900 0.89
6018 ZZ 6018 2RS 90 140 24 1.5 58.2 49.7 2700 5600 1.16
6019 ZZ 6019 2RS 95 145 24 1.5 60.4 53.9 2500 5200 1.21
6020 ZZ 6020 2RS 100 150 24 1.5 60.2 54.2 2500 5100 1.25
6021 ZZ 6021 2RS 105 160 26 2 72.3 65.8 2300 4700 1.59
60/22 ZZ 60/22 2RS 22 44 12 0.6 9.4 5.15 9900 20000 0.073
6022 ZZ 6022 2RS 110 170 28 2 82 73 2200 4500 1.96
6024 ZZ 6024 2RS 120 180 28 2 85 79.3 2100 4200 2.07
6026 ZZ 6026 2RS 130 200 33 2 106 101 1900 3800 3.16
60/28 ZZ 60/28 2RS 28 52 12 0.6 12.4 7.4 8100 16000 0.097
6028 ZZ 6028 2RS 140 210 33 2 110 109 1800 3600 3.55
60/32 ZZ 60/32 2RS 32 58 13 1 15 9.15 7200 14000 0.127
6200 ZZ 6200 2RS 10 30 9 0.6 5.1 2.4 16000 29000 0.032
6201 ZZ 6201 2RS 12 32 10 0.6 6.8 3.05 15000 27000 0.037
6202 ZZ 6202 2RS 15 35 11 0.6 7.65 3.75 13000 24000 0.045
6203 ZZ 6203 2RS 17 40 12 0.6 9.55 4.8 12000 21000 0.065
6204 ZZ 6204 2RS 20 47 14 1 12.8 6.65 9700 17000 0.106
6205 ZZ 6205 2RS 25 52 15 1 14 7.85 8400 15000 0.128
6206 ZZ 6206 2RS 30 62 16 1 19.5 11.3 7000 13000 0.199
6207 ZZ 6207 2RS 35 72 17 1.1 25.7 15.4 6000 11000 0.288
6208 ZZ 6208 2RS 40 80 18 1.1 29.1 17.8 5400 10000 0.366
6209 ZZ 6209 2RS 45 85 19 1.1 32.7 20.3 5100 9200 0.407
6210 ZZ 6210 2RS 50 90 20 1.1 35.1 23.3 4600 8500 0.463
6211 ZZ 6211 2RS 55 100 21 1.5 43.4 29.4 4100 7600 0.607
6212 ZZ 6212 2RS 60 110 22 1.5 52.4 36.2 3700 6900 0.783
6213 ZZ 6213 2RS 65 120 23 1.5 57.2 40.1 3500 6400 0.99
6214 ZZ 6214 2RS 70 125 24 1.5 62.2 44.1 3300 6100 1.07
6215 ZZ 6215 2RS 75 130 25 1.5 67.4 48.3 3100 5800 1.18
6216 ZZ 6216 2RS 80 140 26 2 72.7 53 2900 5400 1.4
6217 ZZ 6217 2RS 85 150 28 2 84 61.9 2700 5000 1.79
6218 ZZ 6218 2RS 90 160 30 2 96.1 71.5 2600 4700 2.15
6219 ZZ 6219 2RS 95 170 32 2.1 109 81.9 2400 4400 2.62
6220 ZZ 6220 2RS 100 180 34 2.1 122 93.1 2300 4200 3.14
6221 ZZ 6221 2RS 105 190 36 2.1 133 105 2200 3900 3.7
62/22 ZZ 62/22 2RS 22 50 14 1 12.8 6.65 9700 17000 0.118
6222 ZZ 6222 2RS 110 200 38 2.1 144 117 2000 3700 4.36
6224 ZZ 6224 2RS 120 215 40 2.1 155 131 1900 3400 5.15
6226 ZZ 6226 2RS 130 230 40 3 167 146 1800 3200 5.82
62/28 ZZ 62/28 2RS 28 58 16 1 17.9 9.75 7600 14000 0.173
6228 ZZ 6228 2RS 140 250 42 3 166 150 1600 2900 7.45
62/32 ZZ 62/32 2RS 32 65 17 1 23.5 13.1 6900 12000 0.228
6300 ZZ 6300 2RS 10 35 11 0.6 8.1 3.45 16000 27000 0.053
6301 ZZ 6301 2RS 12 37 12 1 9.7 4.2 15000 25000 0.06
6302 ZZ 6302 2RS 15 42 13 1 11.4 5.45 12000 20000 0.082
6303 ZZ 6303 2RS 17 47 14 1 13.6 6.65 10000 18000 0.115
6304 ZZ 6304 2RS 20 52 15 1.1 15.9 7.85 9500 17000 0.144
6305 ZZ 6305 2RS 25 62 17 1.1 20.6 11.3 7500 13000 0.232
6306 ZZ 6306 2RS 30 72 19 1.1 26.7 15 6400 12000 0.346
6307 ZZ 6307 2RS 35 80 21 1.5 33.4 19.3 5700 10000 0.457
6308 ZZ 6308 2RS 40 90 23 1.5 40.7 24 5100 9200 0.633
6309 ZZ 6309 2RS 45 100 25 1.5 48.9 29.5 4500 8100 0.833
6310 ZZ 6310 2RS 50 110 27 2 62 38.3 4100 7300 1.07
6311 ZZ 6311 2RS 55 120 29 2 71.6 45 3700 6700 1.37
6312 ZZ 6312 2RS 60 130 31 2.1 81.9 52.2 3500 6200 1.7
6313 ZZ 6313 2RS 65 140 33 2.1 92.7 59.9 3200 5800 2.08
6314 ZZ 6314 2RS 70 150 35 2.1 104 68.2 3000 5400 2.52
6315 ZZ 6315 2RS 75 160 37 2.1 113 77.2 2800 5000 3.02
6316 ZZ 6316 2RS 80 170 39 2.1 123 86.7 2700 4700 3.59
6317 ZZ 6317 2RS 85 180 41 3 133 96.8 2500 4400 4.23
6318 ZZ 6318 2RS 90 190 43 3 143 107 2400 4200 4.91
6319 ZZ 6319 2RS 95 200 45 3 153 119 2200 4000 5.67
6320 ZZ 6320 2RS 100 215 47 3 173 141 2100 3600 7
6321 ZZ 6321 2RS 105 225 49 3 184 153 2000 3500 8.05
63/22 ZZ 63/22 2RS 22 56 16 1.1 18.5 9.4 8600 15000 0.201
6322 ZZ 6322 2RS 110 240 50 3 205 180 1900 3200 9.54
6324 ZZ 6324 2RS 120 260 55 3 207 185 0 3000 12.5
6326 ZZ 6326 2RS 130 280 58 4 229 214 0 2700 15.1
63/28 ZZ 63/28 2RS 28 68 18 1.1 23.5 13.1 6900 12000 0.328
6328 ZZ 6328 2RS 140 300 62 4 253 246 0 2500 19.4
63/32 ZZ 63/32 2RS 32 75 20 1.1 30.1 16.2 6400 11000 0.437
6800 ZZ 6800 2RS 10 19 5 0.3 1.7 0.84 22000 43000 0.005
6801 ZZ 6801 2RS 12 21 5 0.3 1.9 1.05 20000 39000 0.006
6802 ZZ 6802 2RS 15 24 5 0.3 2.1 1.25 16000 33000 0.007
6803 ZZ 6803 2RS 17 26 5 0.3 2.6 1.55 0 30000 0.008
6804 ZZ 6804 2RS 20 32 7 0.3 4 2.45 0 25000 0.018
6805 ZZ 6805 2RS 25 37 7 0.3 4.3 2.95 10000 21000 0.022
6806 ZZ 6806 2RS 30 42 7 0.3 4.55 3.4 0 18000 0.026
6807 ZZ 6807 2RS 35 47 7 0.3 4.75 3.85 0 16000 0.03
6808 ZZ 6808 2RS 40 52 7 0.3 4.95 4.2 6700 14000 0.033
6809 ZZ 6809 2RS 45 58 7 0.3 6.2 5.4 0 13000 0.04
6810 ZZ 6810 2RS 50 65 7 0.3 6.6 6.1 0 11000 0.052
6811 ZZ 6811 2RS 55 72 9 0.3 8.8 8.1 0 10000 0.083
6812 ZZ 6812 2RS 60 78 10 0.3 11.5 10.6 0 9400 0.104
6813 ZZ 6813 2RS 65 85 10 0.6 11.9 11.5 0 8600 0.126
6814 ZZ 6814 2RS 70 90 10 0.6 12.1 11.9 0 8100 0.134
6815 ZZ 6815 2RS 75 95 10 0.6 12.5 12.9 0 7600 0.142
6816 ZZ 6816 2RS 80 100 10 0.6 12.7 13.3 0 7200 0.15
6817 ZZ 6817 2RS 85 110 13 1 18.7 19 0 6600 0.266
6818 ZZ 6818 2RS 90 115 13 1 19 19.7 0 6300 0.279
6820 ZZ 6820 2RS 100 125 13 1 19.6 21.2 0 5700 0.309
6822 ZZ 6822 2RS 110 140 16 1 28.1 30.7 0 5100 0.606
6824 ZZ 6824 2RS 120 150 16 1 29 33 0 4700 0.655
6826 ZZ 6826 2RS 130 165 18 1.1 36.9 41.2 0 4300 0.939
6828 ZZ 6828 2RS 140 175 18 1.1 38.2 44.4 0 4000 1
6900 ZZ 6900 2RS 10 22 6 0.3 2.7 1.25 21000 41000 0.01
6901 ZZ 6901 2RS 12 24 6 0.3 2.9 1.45 18000 36000 0.011
6902 ZZ 6902 2RS 15 28 7 0.3 4.3 2.25 15000 30000 0.017
6903 ZZ 6903 2RS 17 30 7 0.3 4.6 2.55 13000 28000 0.018
6904 ZZ 6904 2RS 20 37 9 0.3 6.35 3.7 11000 23000 0.036
6905 ZZ 6905 2RS 25 42 9 0.3 7 4.55 9300 19000 0.041
6906 ZZ 6906 2RS 30 47 9 0.3 7.25 5 8200 17000 0.045
6907 ZZ 6907 2RS 35 55 10 0.6 10.9 7.75 6800 14000 0.073
6908 ZZ 6908 2RS 40 62 12 0.6 13.7 9.95 6100 13000 0.112
6909 ZZ 6909 2RS 45 68 12 0.6 14.1 10.9 5500 11000 0.132
6910 ZZ 6910 2RS 50 72 12 0.6 14.5 11.7 0 11000 0.133
6911 ZZ 6911 2RS 55 80 13 1 16.6 14.1 4500 9600 0.185
6912 ZZ 6912 2RS 60 85 13 1 20.2 17.3 0 8900 0.192
6913 ZZ 6913 2RS 65 90 13 1 17.4 16.1 3900 8400 0.211
6914 ZZ 6914 2RS 70 100 16 1 23.7 21.2 3600 7600 0.342
6915 ZZ 6915 2RS 75 105 16 1 24.4 22.6 0 7200 0.363
6916 ZZ 6916 2RS 80 110 16 1 25 24 3200 6800 0.382
6918 ZZ 6918 2RS 90 125 18 1.1 32.8 31.6 2800 6000 0.565
6919 ZZ 6919 2RS 95 130 18 1.1 33.7 33.5 2700 5700 0.705
6920-1 ZZ 6920-1 2RS 100 140 20 1.1 45 41.9 0 5300 0.96
6921-1 ZZ 6921-1 2RS 105 145 20 1.1 46.5 44.8 2400 5100 1
6922 ZZ 6922 2RS 110 150 20 1.1 47.9 47.8 0 4900 1.04
6924 ZZ 6924 2RS 120 165 22 1.1 57.2 56.9 0 4400 1.41
6926-1 ZZ 6926-1 2RS 130 180 24 1.5 69.6 70 0 4100 1.86
6928-1 ZZ 6928-1 2RS 140 190 24 1.5 71.3 74.8 0 3800 1.98
US $0.1-3.5
/ Set
|
1 Set

(Min. Order)

###

Contact Angle: 15°
Aligning: Non-Aligning Bearing
Separated: Separated
Rows Number: Single
Load Direction: Radial Bearing
Material: Chrome Steel/Gcr-15

###

Samples:
US$ 0/Set
1 Set(Min.Order)

|
Request Sample

###

Customization:

###

Name: SKF/NSK/KOYO/TIMKEN/SNR/NTN/NACHI roller bearing/ball bearing/wheel bearing/auto bearing/hub bearing
Type: ball bearing/roller bearing/wheel bearing/auto bearing
Position: Motor, Gearbox, Automobiles
Weight: – KG
Specifications: – mm
Material: Chrome steel/GCR-15
Technology: Hot forging
CAGE: Metal
SEAL: Open/2RS/ZZ
Rolling body: Steel ball
ABS: Without
Quality: Top grade
Brands: DHXB, OEM
Origin: China
Pictures were taken in kind, if you want more details please contact us, we provide quality products with competitive advantages for you!

###

Bearing Designation Boundary Dimensions Basic Load 
Rating(kN)
Limit Speed Mass
(mm)
Sheild Sealed d D B Cr Cor Grease Oil (kg)
(min.) Approx
6000 ZZ 6000 2RS 10 26 8 0.3 4.55 1.95 19000 36000 0.019
6001 ZZ 6001 2RS 12 28 8 0.3 5.1 2.4 17000 32000 0.022
6002 ZZ 6002 2RS 15 32 9 0.3 5.6 2.85 14000 27000 0.03
6003 ZZ 6003 2RS 17 35 10 0.3 6 3.25 12000 25000 0.039
6004 ZZ 6004 2RS 20 42 12 0.6 9.4 5.05 10000 21000 0.069
6005 ZZ 6005 2RS 25 47 12 0.6 10.1 5.85 9000 18000 0.08
6006 ZZ 6006 2RS 30 55 13 1 13.2 8.25 7500 15000 0.116
6007 ZZ 6007 2RS 35 62 14 1 15.9 10.3 6500 13000 0.155
6008 ZZ 6008 2RS 40 68 15 1 16.7 11.5 5800 12000 0.192
6009 ZZ 6009 2RS 45 75 16 1 21 15.1 5300 11000 0.245
6010 ZZ 6010 2RS 50 80 16 1 21.8 16.6 4800 9900 0.261
6011 ZZ 6011 2RS 55 90 18 1.1 28.3 21.2 4300 8900 0.385
6012 ZZ 6012 2RS 60 95 18 1.1 29.4 23.2 4000 8400 0.415
6013 ZZ 6013 2RS 65 100 18 1.1 30.5 25.2 3700 7800 0.435
6014 ZZ 6014 2RS 70 110 20 1.1 38.1 30.9 3500 7200 0.602
6015 ZZ 6015 2RS 75 115 20 1.1 39.6 33.5 3300 6800 0.638
6016 ZZ 6016 2RS 80 125 22 1.1 47.6 39.8 3100 6300 0.85
6017 ZZ 6017 2RS 85 130 22 1.1 49.5 43.1 2900 5900 0.89
6018 ZZ 6018 2RS 90 140 24 1.5 58.2 49.7 2700 5600 1.16
6019 ZZ 6019 2RS 95 145 24 1.5 60.4 53.9 2500 5200 1.21
6020 ZZ 6020 2RS 100 150 24 1.5 60.2 54.2 2500 5100 1.25
6021 ZZ 6021 2RS 105 160 26 2 72.3 65.8 2300 4700 1.59
60/22 ZZ 60/22 2RS 22 44 12 0.6 9.4 5.15 9900 20000 0.073
6022 ZZ 6022 2RS 110 170 28 2 82 73 2200 4500 1.96
6024 ZZ 6024 2RS 120 180 28 2 85 79.3 2100 4200 2.07
6026 ZZ 6026 2RS 130 200 33 2 106 101 1900 3800 3.16
60/28 ZZ 60/28 2RS 28 52 12 0.6 12.4 7.4 8100 16000 0.097
6028 ZZ 6028 2RS 140 210 33 2 110 109 1800 3600 3.55
60/32 ZZ 60/32 2RS 32 58 13 1 15 9.15 7200 14000 0.127
6200 ZZ 6200 2RS 10 30 9 0.6 5.1 2.4 16000 29000 0.032
6201 ZZ 6201 2RS 12 32 10 0.6 6.8 3.05 15000 27000 0.037
6202 ZZ 6202 2RS 15 35 11 0.6 7.65 3.75 13000 24000 0.045
6203 ZZ 6203 2RS 17 40 12 0.6 9.55 4.8 12000 21000 0.065
6204 ZZ 6204 2RS 20 47 14 1 12.8 6.65 9700 17000 0.106
6205 ZZ 6205 2RS 25 52 15 1 14 7.85 8400 15000 0.128
6206 ZZ 6206 2RS 30 62 16 1 19.5 11.3 7000 13000 0.199
6207 ZZ 6207 2RS 35 72 17 1.1 25.7 15.4 6000 11000 0.288
6208 ZZ 6208 2RS 40 80 18 1.1 29.1 17.8 5400 10000 0.366
6209 ZZ 6209 2RS 45 85 19 1.1 32.7 20.3 5100 9200 0.407
6210 ZZ 6210 2RS 50 90 20 1.1 35.1 23.3 4600 8500 0.463
6211 ZZ 6211 2RS 55 100 21 1.5 43.4 29.4 4100 7600 0.607
6212 ZZ 6212 2RS 60 110 22 1.5 52.4 36.2 3700 6900 0.783
6213 ZZ 6213 2RS 65 120 23 1.5 57.2 40.1 3500 6400 0.99
6214 ZZ 6214 2RS 70 125 24 1.5 62.2 44.1 3300 6100 1.07
6215 ZZ 6215 2RS 75 130 25 1.5 67.4 48.3 3100 5800 1.18
6216 ZZ 6216 2RS 80 140 26 2 72.7 53 2900 5400 1.4
6217 ZZ 6217 2RS 85 150 28 2 84 61.9 2700 5000 1.79
6218 ZZ 6218 2RS 90 160 30 2 96.1 71.5 2600 4700 2.15
6219 ZZ 6219 2RS 95 170 32 2.1 109 81.9 2400 4400 2.62
6220 ZZ 6220 2RS 100 180 34 2.1 122 93.1 2300 4200 3.14
6221 ZZ 6221 2RS 105 190 36 2.1 133 105 2200 3900 3.7
62/22 ZZ 62/22 2RS 22 50 14 1 12.8 6.65 9700 17000 0.118
6222 ZZ 6222 2RS 110 200 38 2.1 144 117 2000 3700 4.36
6224 ZZ 6224 2RS 120 215 40 2.1 155 131 1900 3400 5.15
6226 ZZ 6226 2RS 130 230 40 3 167 146 1800 3200 5.82
62/28 ZZ 62/28 2RS 28 58 16 1 17.9 9.75 7600 14000 0.173
6228 ZZ 6228 2RS 140 250 42 3 166 150 1600 2900 7.45
62/32 ZZ 62/32 2RS 32 65 17 1 23.5 13.1 6900 12000 0.228
6300 ZZ 6300 2RS 10 35 11 0.6 8.1 3.45 16000 27000 0.053
6301 ZZ 6301 2RS 12 37 12 1 9.7 4.2 15000 25000 0.06
6302 ZZ 6302 2RS 15 42 13 1 11.4 5.45 12000 20000 0.082
6303 ZZ 6303 2RS 17 47 14 1 13.6 6.65 10000 18000 0.115
6304 ZZ 6304 2RS 20 52 15 1.1 15.9 7.85 9500 17000 0.144
6305 ZZ 6305 2RS 25 62 17 1.1 20.6 11.3 7500 13000 0.232
6306 ZZ 6306 2RS 30 72 19 1.1 26.7 15 6400 12000 0.346
6307 ZZ 6307 2RS 35 80 21 1.5 33.4 19.3 5700 10000 0.457
6308 ZZ 6308 2RS 40 90 23 1.5 40.7 24 5100 9200 0.633
6309 ZZ 6309 2RS 45 100 25 1.5 48.9 29.5 4500 8100 0.833
6310 ZZ 6310 2RS 50 110 27 2 62 38.3 4100 7300 1.07
6311 ZZ 6311 2RS 55 120 29 2 71.6 45 3700 6700 1.37
6312 ZZ 6312 2RS 60 130 31 2.1 81.9 52.2 3500 6200 1.7
6313 ZZ 6313 2RS 65 140 33 2.1 92.7 59.9 3200 5800 2.08
6314 ZZ 6314 2RS 70 150 35 2.1 104 68.2 3000 5400 2.52
6315 ZZ 6315 2RS 75 160 37 2.1 113 77.2 2800 5000 3.02
6316 ZZ 6316 2RS 80 170 39 2.1 123 86.7 2700 4700 3.59
6317 ZZ 6317 2RS 85 180 41 3 133 96.8 2500 4400 4.23
6318 ZZ 6318 2RS 90 190 43 3 143 107 2400 4200 4.91
6319 ZZ 6319 2RS 95 200 45 3 153 119 2200 4000 5.67
6320 ZZ 6320 2RS 100 215 47 3 173 141 2100 3600 7
6321 ZZ 6321 2RS 105 225 49 3 184 153 2000 3500 8.05
63/22 ZZ 63/22 2RS 22 56 16 1.1 18.5 9.4 8600 15000 0.201
6322 ZZ 6322 2RS 110 240 50 3 205 180 1900 3200 9.54
6324 ZZ 6324 2RS 120 260 55 3 207 185 0 3000 12.5
6326 ZZ 6326 2RS 130 280 58 4 229 214 0 2700 15.1
63/28 ZZ 63/28 2RS 28 68 18 1.1 23.5 13.1 6900 12000 0.328
6328 ZZ 6328 2RS 140 300 62 4 253 246 0 2500 19.4
63/32 ZZ 63/32 2RS 32 75 20 1.1 30.1 16.2 6400 11000 0.437
6800 ZZ 6800 2RS 10 19 5 0.3 1.7 0.84 22000 43000 0.005
6801 ZZ 6801 2RS 12 21 5 0.3 1.9 1.05 20000 39000 0.006
6802 ZZ 6802 2RS 15 24 5 0.3 2.1 1.25 16000 33000 0.007
6803 ZZ 6803 2RS 17 26 5 0.3 2.6 1.55 0 30000 0.008
6804 ZZ 6804 2RS 20 32 7 0.3 4 2.45 0 25000 0.018
6805 ZZ 6805 2RS 25 37 7 0.3 4.3 2.95 10000 21000 0.022
6806 ZZ 6806 2RS 30 42 7 0.3 4.55 3.4 0 18000 0.026
6807 ZZ 6807 2RS 35 47 7 0.3 4.75 3.85 0 16000 0.03
6808 ZZ 6808 2RS 40 52 7 0.3 4.95 4.2 6700 14000 0.033
6809 ZZ 6809 2RS 45 58 7 0.3 6.2 5.4 0 13000 0.04
6810 ZZ 6810 2RS 50 65 7 0.3 6.6 6.1 0 11000 0.052
6811 ZZ 6811 2RS 55 72 9 0.3 8.8 8.1 0 10000 0.083
6812 ZZ 6812 2RS 60 78 10 0.3 11.5 10.6 0 9400 0.104
6813 ZZ 6813 2RS 65 85 10 0.6 11.9 11.5 0 8600 0.126
6814 ZZ 6814 2RS 70 90 10 0.6 12.1 11.9 0 8100 0.134
6815 ZZ 6815 2RS 75 95 10 0.6 12.5 12.9 0 7600 0.142
6816 ZZ 6816 2RS 80 100 10 0.6 12.7 13.3 0 7200 0.15
6817 ZZ 6817 2RS 85 110 13 1 18.7 19 0 6600 0.266
6818 ZZ 6818 2RS 90 115 13 1 19 19.7 0 6300 0.279
6820 ZZ 6820 2RS 100 125 13 1 19.6 21.2 0 5700 0.309
6822 ZZ 6822 2RS 110 140 16 1 28.1 30.7 0 5100 0.606
6824 ZZ 6824 2RS 120 150 16 1 29 33 0 4700 0.655
6826 ZZ 6826 2RS 130 165 18 1.1 36.9 41.2 0 4300 0.939
6828 ZZ 6828 2RS 140 175 18 1.1 38.2 44.4 0 4000 1
6900 ZZ 6900 2RS 10 22 6 0.3 2.7 1.25 21000 41000 0.01
6901 ZZ 6901 2RS 12 24 6 0.3 2.9 1.45 18000 36000 0.011
6902 ZZ 6902 2RS 15 28 7 0.3 4.3 2.25 15000 30000 0.017
6903 ZZ 6903 2RS 17 30 7 0.3 4.6 2.55 13000 28000 0.018
6904 ZZ 6904 2RS 20 37 9 0.3 6.35 3.7 11000 23000 0.036
6905 ZZ 6905 2RS 25 42 9 0.3 7 4.55 9300 19000 0.041
6906 ZZ 6906 2RS 30 47 9 0.3 7.25 5 8200 17000 0.045
6907 ZZ 6907 2RS 35 55 10 0.6 10.9 7.75 6800 14000 0.073
6908 ZZ 6908 2RS 40 62 12 0.6 13.7 9.95 6100 13000 0.112
6909 ZZ 6909 2RS 45 68 12 0.6 14.1 10.9 5500 11000 0.132
6910 ZZ 6910 2RS 50 72 12 0.6 14.5 11.7 0 11000 0.133
6911 ZZ 6911 2RS 55 80 13 1 16.6 14.1 4500 9600 0.185
6912 ZZ 6912 2RS 60 85 13 1 20.2 17.3 0 8900 0.192
6913 ZZ 6913 2RS 65 90 13 1 17.4 16.1 3900 8400 0.211
6914 ZZ 6914 2RS 70 100 16 1 23.7 21.2 3600 7600 0.342
6915 ZZ 6915 2RS 75 105 16 1 24.4 22.6 0 7200 0.363
6916 ZZ 6916 2RS 80 110 16 1 25 24 3200 6800 0.382
6918 ZZ 6918 2RS 90 125 18 1.1 32.8 31.6 2800 6000 0.565
6919 ZZ 6919 2RS 95 130 18 1.1 33.7 33.5 2700 5700 0.705
6920-1 ZZ 6920-1 2RS 100 140 20 1.1 45 41.9 0 5300 0.96
6921-1 ZZ 6921-1 2RS 105 145 20 1.1 46.5 44.8 2400 5100 1
6922 ZZ 6922 2RS 110 150 20 1.1 47.9 47.8 0 4900 1.04
6924 ZZ 6924 2RS 120 165 22 1.1 57.2 56.9 0 4400 1.41
6926-1 ZZ 6926-1 2RS 130 180 24</